![]() |
|
Place a document on the machine, and press <Scan -> PC1> or <Scan -> PC2>, and scanning starts immediately. The type of scan (color or black and white), the save destination for the document, and other settings can be registered to a button, and documents can be scanned using those settings. This section describes how to register settings in a button and scan with it.
|
Scan type
|
Color
|
Resolution
|
File format
|
<Color Scan>
|
Color
|
300 dpi
|
PDF (searchable)*1/High compression
|
<B&W Scan>
|
Black and white*2
|
300 dpi
|
TIFF
|
<Custom 1>
|
Color
|
300 dpi
|
JPEG/Exif
|
<Custom 2>
|
Color
|
300 dpi
|
PDF (searchable)*1/Standard compression
|
*1A PDF format where characters on the document are scanned as text data and the text can be searched using a computer.
*2Documents are scanned in black and white only, with no intermediate shades of gray.
|
|
![]() You cannot scan while the MF Toolbox setup screen is displayed. Close the screen before scanning.
|
|
![]() |
1
|
If there are additional pages of documents to be scanned, place the next document on the platen glass, and press
![]() ![]() Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
|
2
|
Tap <Finish Scan>.
The save destination folder is displayed on the computer.
|
![]() |
About the save destination folderBy default, the scanned data is saved to the [Pictures] or [My Pictures] folder. A subfolder named with the scanning date is created, and the data is saved to that folder.
To change the save destination, see Configuring Storing Settings.
|