Storing Forwarding Settings

1.
Press (Settings/Registration).
2.
Press [Function Settings] → [Receive/Forward] → [Common Settings].
3.
Press [Forwarding Settings].
4.
Press [Register].
To recall the forwarding settings of a received file that you have stored, press [History 1], [History 2], or [History 3].
IMPORTANT
The forwarding settings are stored in memory if you press [OK] on the Register screen or the Edit screen.
Identical forwarding settings are stored only once in memory.
NOTE
The three most recent forwarding settings that were stored in memory are not deleted, even when the power is turned Off.
Forwarding settings for received files not stored in memory are not displayed, even if you press a button for <Previous Settings>.
5.
Press [Condition Name].
6.
Enter the condition name → press [OK].
NOTE
If you do not specify a file name, the first 24 characters of the condition name are used as the file name. However, you can change the name of the file at any time.
7.
Press [Conditions].
8.
Select the desired mode from the <Receive Method:> drop-down list.
Depending on the fax board installed, you can make the following selections:
If the Super G3 2nd Line Fax Board are installed:
Fax: Line Shared, Fax: Line 1, Fax: Line 2, I-Fax
9.
Set the forwarding conditions.
You select [I-Fax] for <Receive Method:>:
You select [Fax] for <Receive Method:>:
You select [I-Fax] for <Receive Method:>:
Select the desired search criteria from the <To:>, <From:>, or <Subject:> drop-down list.
The available criteria are:
<To:>: To (recipient machine)
<From:>: From (sending machine)
<Subject:>: Subject
Example:
If the I-fax received by this machine is forwarded, <To:> will become this machine, and <From:> will become the machine from which the I-fax was received.
The available criteria are:
[Disregarded]:
Disregards the To, From, or Subject information as forwarding conditions.
[Equals]:
Forwards the document if the From or Subject information matches all of the characters entered.
[Differs from]:
Forwards the document if the To, From, or Subject information differs from the characters entered.
[Begins with]:
Forwards the document if the To, From, or Subject information begins with the characters entered.
[Ends with]:
Forwards the document if the To, From, or Subject information ends with the characters entered.
[Contains]:
Forwards the document if the To, From, or Subject information contains the characters entered.
[Does Not Contain]:
Forwards the document if the To, From, or Subject information does not contain the characters entered.
[Equals] is not an option for <To:>.
Press [Set] → enter the forwarding condition.
If you want to change the criteria for the forwarding conditions without changing the forwarding condition for the To, From, and Subject drop-down lists, press [Set] next to the criteria you want to change → enter the new criteria → press [OK].
NOTE
If you select [Disregarded] as the forwarding condition, you cannot enter any criteria.
You select [Fax] for <Receive Method:>:
Select the desired search criteria from the <Fax Number>, <Subaddress:>, or <Password:> drop-down list.
The available criteria are:
[Disregarded]:
Disregards the To, From, or Subject information as forwarding conditions.
[Does Not Exist]:
The Subaddress or Password information does not exist for the received document.
[Equals]:
Forwards the document if the From or Subject information matches all of the characters entered.
[Differs from]:
Forwards the document if the To, From, or Subject information differs from the characters entered.
[Begins with]:
Forwards the document if the To, From, or Subject information begins with the characters entered.
[Ends with]:
Forwards the document if the To, From, or Subject information ends with the characters entered.
[Contains]:
Forwards the document if the To, From, or Subject information contains the characters entered.
[Does Not Contain]:
Forwards the document if the To, From, or Subject information does not contain the characters entered.
[Does Not Exist] is not an option for <Fax Number>.
[Does Not Exist] and [Equals] are the only forwarding conditions that you can select for <Subaddress:> and <Password:>.
Press [Set] → enter the forwarding condition.
Details of each item are shown below.
 :
Press to move the position of the cursor.
[Backspace]:
Press to delete the last number entered.
[Space]:
Press to insert a space between numbers.
[+]:
Use to insert a country code. Press [+] after the country code, before the fax number.
If you want to change the criteria for forwarding conditions without changing the forwarding condition for the <Fax Number>, <Subaddress:>, and <Password:> drop-down lists, press [Set] next to the criteria you want to change → enter the new criteria.
If you select password as a forwarding condition, press [Set] → <Password:> → enter a password using - (numeric keys), , and . Press [Confirm] → enter the PIN again for confirmation → press [OK].
You can enter the following characters for the <Fax Number>, <Subaddress:>, and <Password:> forwarding criteria.
Fax Number:
0 to 9, [Space], [+]
Subaddress:
0 to 9, *, #, [Space]
Password:
0 to 9, *, #, [Space]
NOTE
If you select [Disregarded] or [Does Not Exist] as the forwarding condition, you cannot enter any criteria.
You cannot set the following combinations of conditions:
Fax Number
Subaddress
Password
[Disregarded]
[Does Not Exist]
[Equals]
Other than [Disregarded]
[Equals]
[Equals]
Other than [Disregarded]
[Does Not Exist]
[Equals]
Other than [Disregarded]
[Equals]
[Does Not Exist]
10.
Press [OK].
11.
Select [Forwarding Destination] → select the forwarding destination → press [OK].
NOTE
For instructions on registering an Advanced Space as a destination in the Address Book, see "Registering an Advanced Space Address."
For more information on Advanced Spaces, see user manuals for other imageRUNNER ADVANCE series machines with Advanced Spaces.
If you select [I-Fax] for <Receive Method:>, you cannot specify a WebDAV server as the forwarding destination. If the selected destination is a group address which contains a WebDAV server, the document is not forwarded to the WebDAV server.
If a screen prompting you to enter an access number is displayed, press [Access No.] → enter the access number. (See "Registering an E-Mail Address" and "Storing Fax Numbers.")
You can restrict the types of destinations displayed in the results list by selecting the desired type of destination from the drop-down list.
Use the Address List drop-down list to display each address book (Address Lists 1 to 10 and one-touch buttons). Address lists categorize the addresses stored in the Address Book.
You can specify e-mail, I-fax, file server, and group destinations as forwarding destinations.
You can specify the Remote Address Book as forwarding destinations by pressing [To Remote Add. Book]. For more information on the Remote Address Book, see "Specifying Destinations Using the Address Book (Remote)."
NOTE
Advanced Space destinations are indicated by .
To cancel a selected destination, select the destination again.
To view the detailed information for a selected destination, select the destination → press [Details].
Register destinations in the Address Book in advance. (See "Register Destinations.")
[Access No.] appears on the screen only if [Manage Address Book Access Numbers] is set to 'On' in [Set Destination] (Settings/Registration). (See "Managing the Address Book with Access Numbers.")
If you select a fax number as the forwarding destination, the subaddress and password registered in the Address Book are ignored.
You cannot select multiple destinations at the same time. To forward to multiple destinations, select a group address.
You can specify fax numbers and group addresses which contain fax destinations as forwarding destinations.
If a forwarding error occurs when the address in the Remote Address Book is registered as the forwarding destination, confirm that the address is not deleted from the Remote Address Book.
12.
Press [Next].
13.
Press [File Name].
14.
Enter a file name → press [OK].
The condition name is automatically entered as the document's name by default. However, you can change this name.
15.
Specify the settings from the <Store/Print Received File> drop-down list.
Select [On] if you want to store or print received files.
NOTE
If you set both <Store/Print Received File> and the Memory Lock mode to 'On', the received file is stored in the Memory RX Inbox. If you set Memory Lock to 'Off', the received file is printed automatically. (See "Specifying the Fax/I-Fax Inbox Settings.")
16.
Press [Specify Fwd Time].
17.
Select the conditions.
IMPORTANT
You cannot set the same time for both the start time and end time.
If you select [Everyday]:
If you select [Specify Period]:
If you select [Off]:
If you select [Everyday]:
Enter the start time and end time using - (numeric keys) → press [OK].
The time is displayed in 24-hour notation. Enter the time as a four digit number including zeros.
NOTE
If the end time is set earlier than the start time, the received documents will stop being forwarded at the specified end time on the following day.
Examples: Start time: 22:00, end time: 21:00 →The end time is 21:00 on the following day.
If you select [Specify Period]:
Press [Add].
Select the day of the week to start forwarding from the <Start Time> drop-down list.
Press next to the Start Time drop-down list → enter the time at which to start forwarding using - (numeric keys).
The time is displayed in 24-hour notation. Enter the time as a four digit number including zeros.
If you press [All Day], the start and end times are automatically set to '00:00'. The day for the end time is automatically set to the day following the day for the start time.
Set the end time in the same way as the start time → press [OK] → [OK].
You can store up to seven different combinations of start and end times.
To change previously stored settings, select the setting that you want to change → press [Edit].
To delete previously stored settings, select the setting that you want to delete → press [Delete].
NOTE
If the end time is set earlier than the start time, and both the start time and the end time are set for the same day of the week, the received files will stop being forwarded at the specified end time on the specified day of the following week.
Examples: Start time: Monday 22:00, end time: Monday 21:00 →The end time is 21:00 on Monday of the following week.
If you select [Off]:
Press [OK].
18.
Press [Fwd Done Notice] → select the destination to send the forwarding done notice → press [OK].
If you want to select a destination that is stored with an access number, press [Access No.] → enter the access number. (See "Registering an E-Mail Address" and "Storing Fax Numbers.")
Use the Address List drop-down list to display each address book (Address Lists 1 to 10 and one-touch buttons). Address lists categorize the addresses stored in the Address Book.
NOTE
To view the detailed information for a selected destination, select the destination → press [Details].
You cannot select multiple destinations at the same time.
Register destinations in the Address Book in advance. (See "Register Destinations.")
[Access No.] appears on the screen only if [Manage Address Book Access Numbers] is set to 'On' in [Set Destination] (Settings/Registration). (See "Managing the Address Book with Access Numbers.")
19.
Select whether to check [Notice Only for Errors].
If you want the forwarding done notice to be sent only when an error occurs, press [Notice Only for Errors].
If you want the forwarding done notice to be sent every time a received file is forwarded, do not press [Notice Only for Errors].
20.
Press file format → select the file format of the image you want to forward → press [OK].
This part of the procedure is not necessary if any of the following is true:
A fax number is specified as the forwarding destination
An I-fax address is specified as the forwarding destination
File formats:
If Receive Type is set to 'Fax', the file formats that you can select are as follows:
[TIFF]:
Sends the file in the TIFF format.
[PDF]:
Sends the file in the PDF format. You can also select [OCR (Text Searchable)] or [Add Digital Signatures]. If you want to add a digital signature, you can select [Device Signature].
[XPS]:
Sends the file in the XPS format. You can also select [OCR (Text Searchable)] and/or [Add Device Signature].
Refer to the following for information on setting each type of PDF:
[OCR (Text Searchable)]: Searchable PDF/XPS/OOXML
[Add Digital Signatures]: Adding a Digital Signature to a PDF or XPS
If you want to separate multiple images and send them as a separate file per page, press [Divide into Pages]. The key lights. If you want to send multiple images as a single file without dividing them, do not press [Divide into Pages]. The key remains unlit.
NOTE
For more information on file formats, see "Glossary."
21.
Press [OK].
IMPORTANT
You cannot set multiple forwarding conditions that contain the same subaddress setting.
22.
Press [Other Operations].
23.
Press [E-Mail Priority] → select a priority for your forwarded e-mail messages → press [OK].
This setting is necessary only if the forwarding destination is an e-mail address.
24.
Press [Close].
0C1Y-0AL