Checking the Status of Consumables

You can check the status of consumables, such as detailed paper information and the remaining amount of toner and staples. You can also register/set the paper type to load in a paper drawer.

Press

(Status Monitor/Cancel).

Press [Consumables].

To check the details of paper loaded in the machine:

To check other information:

To register/set a paper type:

To check the details of paper loaded in the machine:

Select the paper you want to check → press [Details].

You can press

to enlarge the displayed list.

Press [OK].

To check other information:

Check the percentage of memory usage, amount of waste toner, and the remaining amounts of toner and staples.

NOTE

The table below indicates the remaining amount of consumables.

Display	Remaining amount of toner
OK	100 to 11%
Low	10 to 1%
Empty	0%

Display	Amount of waste toner
OK	0 to 95%
Near Full	96 to 99%
Full	100 %

Display	Remaining amount of staples Remaining amount of saddle stitch staples
OK	100 to 26%
Low	25 to 1%
Empty	0%

To register/set a paper type:

Press [Reg.].

Select an item to register/set → register/set the paper type.

[Paper Settings]:	Sets the paper type to load by selecting a paper source.
[Paper Type Management Settings]:	Registers a user-defined paper type by entering a name.

NOTE
For instructions on specifying [Paper Settings], see "Registering the Paper Type for a Paper Source." For instructions on specifying [Paper Type Management Settings], see "Registering/Editing Custom Paper Types."

Press [OK].