Registering a Group Address

The Group Address feature enables you to create a group. You can register different types of destinations (such as e-mail, I-fax, or file server destinations) as a single group.
You can register up to 256 destinations in a group address.

IMPORTANT
If you want to store a group address, the destinations must be stored beforehand, such as fax numbers, e-mail addresses, and file server addresses.

Press

(Settings/Registration).

Press [Set Destination] → [Register Destinations] → [Register New Dest.].

Press [Group].

Press [Name].

Enter a name for the group → press [Next].

Press the drop-down list → select an address list from Address List 1 to 10.

Address lists are a convenient way to classify destinations.

The group address that you enter will be stored in the selected address list.

Press [Add from Address Book] or [Store in Mail Box].

To store destinations in a group address, the destinations must be stored in the address list that contains the group address.

To delete a destination, select the destination that you want to delete → press [Delete].

If you select [Add from Address Book]:

If you select [Store in Mail Box]:

If you select [Add from Address Book]:

Select the destination to register from the address book → press [OK].

If you want to select a destination that is stored with an access number, press [Access No.] → enter the access number. (See Registering an E-Mail Address and "Storing Fax Numbers.")

To cancel a selected destination, select the destination again.

You can restrict the types of destinations displayed in the results list by pressing the drop-down list and selecting the desired type of destination.

To check the detailed information for a selected destination, select the destination → press [Details]. Press [OK] to return to the previous screen.

Repeat step 7 to register other addresses as necessary.

NOTE
[Access No.] appears on the screen only if [Manage Address Book Access Numbers] is set to 'On' in [Set Destination] (Settings/Registration). (See "Managing the Address Book with Access Numbers.")

If you select [Store in Mail Box]:

Select the desired mail box from the Mail Box Selection screen → press [OK].

NOTE
You can register only one mail box in a group address.

Press [OK] → [Close].

If you are performing Access Number Management for the Address Book, perform the following operation.

Press [Next] → [Access No.] → [Access No.].

Enter the access number using

(numeric keys) → press [Confirm].

Enter the access number again for confirmation → press [OK] → [OK].

NOTE
If you want to store a group address, you can only select destinations registered in the same Address List. You can register e-mail addresses, I-fax addresses, file server addresses, and locations to store the file in a group address. If the fax board is installed or the Remote Fax Kit is activated, you can also store fax numbers and locations to store the file in a group address. You cannot send to a group address including a file server in which the Enter Password Each Time setting is set to 'On'. (See "Registering a File Server Address.")

NOTE

If you want to store a group address, you can only select destinations registered in the same Address List.

You can register e-mail addresses, I-fax addresses, file server addresses, and locations to store the file in a group address.

If the fax board is installed or the Remote Fax Kit is activated, you can also store fax numbers and locations to store the file in a group address.

You cannot send to a group address including a file server in which the Enter Password Each Time setting is set to 'On'. (See "Registering a File Server Address.")