Setting IPv6 DNS

Before specifying the DNS settings, see "Attention (DNS Settings)."
DNS (Domain Name Service) is a service used for associating a host name (a name of a computer or a printer on a TCP/IP network) with an IP address.
1
Start the Remote UI and log on in system manager mode.
"Starting the Remote UI"
2
Click [Settings/Registration].
3
Click [Network Settings] -> [TCP/IP Settings].
4
Click [Edit] in [IPv6 Settings].
5
Specify DNS settings.
[Primary DNS Server Address]
Enter the IP address of the primary DNS server.
[Secondary DNS Server Address]
Enter the IP address of the secondary DNS server.
[Use IPv4 Host/Domain Names]
Select the check box to use the same name as IPv4.
[Host Name]
Enter the host name to be added to the DNS server. Up to 47 characters can be entered.
[Domain Name]
Enter the name of the domain to which the machine belongs. Up to 47 characters can be entered.
* For example, "example.com"
[DNS Dynamic Update]
Select this check box to use DNS Dynamic Update.
Once the check box is selected, you do not need to refresh the IP address of the machine or specify [Host Name] and [Domain Name] for LPR printing.
[Register Manual Address]
Select this check box to register a manual address to the DNS server.
[Register Stateful Address]
Select this check box to register a stateful address to the DNS server.
[Register Stateless Address]
Select this check box to register a stateless address to the DNS server.
[DNS Dynamic Update Time]
Set the dynamic update interval (from 0 to 48 hours).
6
Specify mDNS settings.
Proceed to Step 7 when not using mDNS.
[Use mDNS]
Select the check box to use the mDNS.
[Use IPv4 name for mDNS]
Select the check box to use the same name as IPv4.
[mDNS Name]
Enter the mDNS name when the [Use IPv4 name for mDNS] check box is not selected.
7
Click [OK].