Basic Copy Operations

1
Place your document.
"Placing Documents"
"Supported Document Types"
Up to 50 documents can be loaded into the feeder.
2
Press [].
The copy mode screen appears.
3
Specify the copy settings as needed.
"Selecting Copy Papers"
"Density Adjustment"
"Selecting the Document Type"
"2-Sided Copying"
"Enlarging/Reducing Copies"
"Copying Multiple Documents onto One Sheet (N on 1)"
"Collating Copies"
"Erasing Dark Borders and Frame Lines (Frame Erase)"
"Emphasizing the Outline of the Image (Sharpness)"
NOTE
Copy Settings
When you combine multiple settings for use, see "Attention (Combination of Copy Settings)."
The settings specified here are effective only for the current operation. To make the settings effective for all the copy operations, see "Changing the Default Settings."
Register your frequently used settings into the Mode Memory. It is useful. See "Registering and Using Combination of Copy Settings (Mode Memory)."
4
Enter the copy quantity (1 to 99) using numeric keys.
Press [] (Clear) to cancel the entered quantity.
5
Press [] (Start).
Copying starts.
 When <Incorrect Size/Setting> appears
Change the <Paper Settings> menu or load the paper size specified in the <Paper Settings> menu.
"When <Incorrect Size/Setting> Appears"
 When the message <Memory is full. Scanning canceled. Print?> appears
Print the pages successfully scanned or cancel the job.
IMPORTANT
To copy a document without margins
The image may be partially cut off on the output. See the following section in "Specifications" for more information.
"Scan Area"
02YL-043