Adjustment/Maintenance

NOTE
About the menu options in the following chart
Default settings are highlighted in bold.

Copy Image Adjustment

You can adjust copy images.
"Correcting Copy Images"

Printer Density

You can adjust the density when making copies, printing incoming faxes, printing from memory devices or printing reports.
-4 to 0 to +4
"Adjusting the Density"

Toner Saver Mode

Specify whether to conserve the amount of toner used for copying and faxing.
Off, On
"Using the Toner Saver Mode"

Black Text Processing for Color

Adjusts the value for determining whether to output black text on color documents as B&W or color.
Feeder: -3 to 0 to +3
Platen Glass: -3 to 0 to +3
"Adjusting Black Text in Color Documents (Black Text Processing Adjustment in Color Documents)"

Special Processing

Settings
Descriptions
Special Mode U

Due to the paper type (e.g. heavy paper) or usage conditions (e.g. dry conditions), toner smudges and spatters appear on the output. When this occurs, set the setting to ON.
Off, On
"Special Mode"
Special Mode V

Paper (the printed side) curls when damp paper is used to print. When this occurs, change the setting.
Off, Mode 1, Mode 2
"Special Mode"
Special Mode X (only for media printing and printing from PS/PCL printer driver)
Toner smudges and spatters appear on the output, due to the paper type or usage conditions. When this occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Special Mode Z (only for copying)
Toner smudges and spatters appear on the output, due to the paper type or usage conditions. When this occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Special Mode B
Toner smudges and spatters appear on the output, when the toner cartridge was replaced recently, or the machine has not printed anything for an extended period of time. When this occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Special Mode C (only for printing received fax and report printing)
Toner smudges and spatters appear on the output, due to the paper type or usage conditions. When this occurs, set the setting to ON. In addition, the machine runs more quietly in the middle of a print run when this setting is set to ON.
Off, On
"Special Mode"
Special Mode D
Toner smudges and spatters appear on the output, due to the paper type or usage conditions. When this occurs, set the setting to ON. In addition, the machine runs more quietly in the middle of a print run when this setting is set to ON.
Off, On
"Special Mode"

Clean Fixing Unit

If black streaks appear on printed paper, clean the fixing unit when replacing toner cartridges.
"Cleaning the Fixing Unit"

Clean Feeder (iR 1133iF/iR 1133A Only)

If your documents have black streaks or appear dirty due to pencil lead on the roller, clean the feeder.
"Cleaning the Feeder Automatically (iR 1133iF/iR 1133A Only)"
0F27-0K7