Selecting the Method for Connecting the Machine

See "Attention (Selecting the Method for Connecting to the Machine)" in advance.
Select from the following three methods, depending on your environment and devices.
NOTE
Connect your computer both over the network and via a USB cable.
The USB connection and network connection (wired LAN or wireless LAN) can be combined but, wired LAN and wireless LAN cannot.
The router, access points and other devices:
If you are not sure whether the router or access point you are using supports wireless LAN or wired LAN, see the instruction manual provided with the network device you are using, or contact the manufacturer.

USB Connection

Connect using a USB cable.
The machine does not come with a USB cable. Have cables ready as needed.
Follow the steps in the procedure below.
"Selecting the Driver to Be Installed"
"Installing the MF Drivers and MF Toolbox"

Wireless LAN (MF4890dw/MF4880dw Only)

Connect using wireless communication (radio frequency) without using a cable.
"Selecting the Driver to Be Installed"
"Connecting to Wireless LAN (MF4890dw/MF4880dw Only)"
NOTE
Required devices:
A wireless LAN or access point that supports IEEE802.11 (b/g or n) is required.
If you are not sure if the component supports IEEE802.11, see the instruction manual provided with the device or contact the manufacturer.

Wired LAN

Connect using a LAN cable.
"Selecting the Driver to Be Installed"
"Connecting to Wired LAN"
NOTE
Required devices:
Check to make sure that there is a free port for connecting the machine or the computer you use to the router or hub.
Use a Category 5 or higher twisted pair cable for the LAN.
0AE1-014