Communication Management Report

Specify whether to print the Communication Management report automatically.
You can also print the report manually.
The report includes the following:
Start time
Name
No.
Mode
Page
Result
OK
Transmission finished successfully.
NG
Transmission failed.
If an error code is displayed, see the following.
1
Press [] (Report).
2
Press [] or [] to highlight <Report Settings>, and then press [OK].
3
Press [] or [] to highlight <Communication Management Report>, and then press [OK].
4
Specify how you want to print the report.
If you do not want to print the report automatically:
(1)
Press [] or [] to highlight <Auto Print (40 Transmissions)>, and then press [OK].
(2)
Press [] or [] to highlight <Off>, and then press [OK].
(3)
Proceed to step 5.
If you want to print the report automatically:
(1)
Press [] or [] to highlight <Auto Print (40 Transmissions)>, and then press [OK].
(2)
Press [] or [] to highlight <On>, and then press [OK].
(3)
Proceed to step 5.
If you want to print the sending and receiving reports separately:
(1)
Press [] or [] to highlight <Separate TX/RX>, and then press [OK].
(2)
Press [] or [] to highlight <Off> or <On>, and then press [OK].
<Off>: Prints the sending and receiving reports together.
<On>: Prints the sending and receiving reports separately.
(3)
Proceed to step 5.
5
Press [] (Report) to close <Report Settings> screen.
0AE1-049