Connecting to Wireless LAN (MF4890dw/MF4880dw Only)

Before connecting to wireless LAN, see "Attention (Connecting to Wireless LAN)."
Two methods are provided for connecting to the wireless LAN or access point, connecting using WPS (Wi-Fi Protected Setup) function or connecting manually.
NOTE
You cannot use wired LAN and wireless LAN at the same time.
The machine's default connect method is "Wired LAN." When using a wireless LAN connection, it is necessary to switch the connection method to "Wireless LAN."
 "Switching the Connection Method to Wireless LAN or Wired LAN (MF4890dw/MF4880dw Only)"
You can connect the machine to wireless LANs or wired LANs, but you cannot use both at the same time. When using a wireless LAN connection, do not connect a LAN cable to the machine. This may cause malfunctions.

Configuring with WPS Features

When your wireless LAN routers and/or access points support WPS (Wi-Fi Protected Setup) features, you can connect to the machine by using push button system or PIN code system.
NOTE
Checking WPS Functions:
Check whether the box or body of the wireless LAN router or access points that you are using supports the WPS function.
As an example, a symbol such as shown below can be seen on the shipping box or machine.
This supports WPS (Wi-Fi Protected Setup).
If you are still not sure, contact the wireless LAN router or access point manufacturer.
Other setting method:
Refer to the following to set "WPS PIN code method" and/or security settings.

Push Button System

Press the WPS button on your wireless LAN routers and/or access points for connection.

PIN Code System

Enter the PIN code generated by the machine to wireless LAN routers and/or access points for connection.

Configuring Manually

If your wireless LAN routers and/or access points do not support WPS, enter the wireless LAN router and/or access point information to the machine for connection.

Select Access Point

From the list of access points searched by the machine, select a wireless LAN router or an access point to be connected and enter a network key for connection.

Manual Entry

Enter manually the SSID and/or security information (encryption type/authentication method or encryption method/network key) of wireless LAN routers and access points to be connected to the machine.
0AE1-0CH