LCD (Standby Mode)
This section describes the following modes:
|
NOTE
|
Display of the standby mode:You can change the standby display that appears when the power switch is turned ON.
When the machine is idle for 2 minutes, the screen returns to the standby display.
|
Copy Mode
For MF4890dw/MF4870dn/MF4780w/MF4750:
Press [
] (COPY) to switch to the Copy mode screen.
] (COPY) to switch to the Copy mode screen.For MF4730:
Press [
] (COPY/SCAN) to switch to the Copy mode screen.
] (COPY/SCAN) to switch to the Copy mode screen.
When the Copy mode screen is displayed, you can make a selection by pressing [
] or [
].
] or [].The currently selected menu item is highlighted. Press [OK] to proceed to the next screen.
Fax Mode (MF4890dw/MF4870dn/MF4780w/MF4750 Only)
Press [
] (FAX) to switch to Fax mode screen.
] (FAX) to switch to Fax mode screen.
When the Fax mode screen is displayed, you can make a selection by pressing [] or [].
] or [].The currently selected menu item is highlighted. Press [OK] to proceed to the next screen.
Scan Mode
For MF4890dw/MF4870dn/MF4780w/MF4750:
Press [
] (SCAN) to switch to the Scan mode screen.
] (SCAN) to switch to the Scan mode screen.For MF4730:
Press [] (COPY/SCAN) to switch to the Scan mode screen.
] (COPY/SCAN) to switch to the Scan mode screen.When the scan mode screen is displayed, you can make your selection by using [] or [].
] or [].The currently selected menu item is highlighted. Press [OK] to proceed to the next screen.
