Basic Copy Operations

1
Place documents.
"Placing Documents"
"Supported Document Types"
MF4890dw
Up to 50 documents can be loaded into the feeder.
MF4870dn/MF4780w/MF4750/MF4730
Up to 35 documents can be loaded into the feeder.
2
Display the Copy mode screen.
For MF4890dw/MF4870dn/MF4780w/MF4750:
For MF4730:
The Copy mode screen appears.
3
Specify the copy settings as needed.
"Adjusting the Density"
"Selecting the Document Type"
"2-Sided Copying (MF4890dw/MF4870dn Only)"
"Enlarging/Reducing Copies"
"Copying Multiple Documents onto One Sheet (N on 1)"
"Collating Copies"
"Emphasizing the Outline of the Image (Sharpness)"
NOTE
Copy Settings:
The settings specified here are effective only for the current operation. To make the settings effective for all the copy operations, see "Changing the Default Settings."
4
Enter the copy quantity (1 to 99) using numeric keys.
Press [] (Clear) to cancel the entered quantity.
5
Press [] (Start).
Copying starts.
 If <Incorrect Size/Setting> appears:
Change the <Paper Settings> menu properly or load the paper size specified in the <Paper Settings> menu.
"When <Incorrect Size/Setting> Appears"
 If <Memory is full. Scanning canceled. Print?> appears:
Either print all pages that were successfully scanned or cancel the job.
IMPORTANT
To copy a document without margins:
The image may be partially cut off on the output. For more information on the scanning area, see "Scan Area."
0874-042