|
NOTE
|
Menu options in the following chart:Default settings are highlighted in bold.
The settings marked with "*1" are only for MF4890dw/MF4870dn/MF4780w/MF4750.
The settings marked with "*2" are only for MF4890dw/MF4870dn/MF4780w.
The settings marked with "*3" are only for MF4890dw/MF4870dn.
For values with "*4" mark, the default value varies depending on the country where you are using the machine.
|
|
Settings
|
Descriptions
|
|
|
Fax Tone
|
Set the volume for the fax communication sound:
|
|
|
Ring Tone
|
Set the ringer volume:
|
|
|
TX Done Tone
|
Set the volume of the transmission completion tone:
|
|
|
RX Done Tone
|
Set the volume of the receipt completion tone:
|
|
|
Scanning Done Tone
|
Set the volume of the scan completion tone:
|
|
|
Entry Tone
|
Specify whether or not the machine makes a sound when a key on the operation panel is pressed:
|
|
|
Invalid Entry Tone
|
Specify whether or not the machine makes a sound when an invalid key is
pressed:
|
|
|
Warning Tone
|
Specify whether or not the machine makes a sound when unexpected events occur, such as paper jams or improper operations:
|
|
|
Job Done Tone
|
Specify whether the machine makes a sound when a job other than faxing is completed.
Specify the job done tone in <TX Done Tone> and <RX Done Tone>:
|
|
|
Energy Saver Alert
|
Specify whether or not the machine makes a sound when it is in Energy Saver mode:
|
|
|
Original in Feeder Detection Tone
|
Specify whether or not the machine makes a sound when the documents are placed in the feeder. The sound is same as the entry sound:
|
|
Settings
|
Descriptions
|
|
|
Select Default Screen*1
|
Set which screen will appear when the machine is turned ON or auto reset is performed:
|
|
|
Language
|
Select the display language for the machine:
|
|
|
Remote UI Language*2
|
Select the display language for the Remote UI:
|
|
|
Contrast
|
Adjust the display contrast:
|
|
|
Invert Screen Colors
|
If <On> is specified, the colors of the display are inverted.
Select <On> in case you have difficulty viewing the display:
|
|
|
mm/Inch Entry Switch
|
Set the unit of measurement for the paper size:
|
|
|
Message Display Time
|
Set the duration during which each message is displayed on the screen:
|
|
|
Scrolling Speed
|
Set the speed to scroll through the menu when all the menu items cannot be shown on the screen:
|
|
|
Cursor Movement
|
When entering characters, specify whether or not to move the cursor to automatically to the next field:
|
|
Settings
|
Descriptions
|
|
|
Copy
|
Set the Toner Saver mode for the Copy mode:
|
|
|
Fax*1
|
Set the Toner Saver mode for the Fax mode:
|
|