Specifying Destinations

This section describes how to specify fax destinations.
See the following sections to specify destinations:
When you are sending the same fax to multiple destinations simultaneously, see the following.
For the instructions on how to send a fax, see "Basic Procedures for Sending Faxes."

Specifying Destinations by Entering the Fax Number

Specify the fax number using the numeric keys, [] (Tone), and [] (SYMBOLS).
To modify destinations:
To delete the only one character
Press [] (Clear).
To delete the all characters
Press and hold [] (Clear).

Specifying Destinations with One-Touch Keys

Press the one-touch key (01 to 03) in which the destination is registered.
To select a destination from the one-touch keys, you need to register destinations in these keys in advance.
If you press an incorrect key:
(1)
Press [] (Clear).
(2)
Press [] to highlight <Yes>, and then press [OK].
To clear all the scan settings specified, press [] (Reset).

Specifying Destinations Using Coded Dialing Codes

Press [] (Coded Dial), and then enter the three-digit registration number (001 to 100) with the numeric keys.
To select a destination from the coded dialing codes, you need to register destinations in these codes in advance.
If you press an incorrect key:
(1)
Press [] (Clear).
(2)
Press [] to highlight <Yes>, and then press [OK].
To clear all the scan settings specified, press [] (Reset).

Specifying Destinations Using Group Addresses

If group addresses are registered to a one-touch keys:
Press the one-touch key (01 to 03) in which the group address that you want to select is registered.
If group addresses are registered to coded dialing codes:
Press [] (Coded Dial), and then enter the three-digit registration number (001 to 100) with the numeric keys.
To select a destination from the coded dialing codes, you need to register group addresses in these codes in advance.
If you press an incorrect key:
(1)
Press [] (Clear).
(2)
Press [] to highlight <Yes>, and then press [OK].
To clear all the scan settings specified, press [] (Reset).

Specifying Destinations Using the Address Book

After searching for destinations from the registered address book (one-touch keys, coded dialing, or group dialing), the destinations to be specified appear on the display. You can specify the displayed address as a destination. You can also search for destinations with the initial of the registered destination name.
To select a destination from the address book, you need to register destinations in the address book in advance.
1
Press [] (FAX).
2
Press [] (Address Book).
3
Press [] or [] to search for your destination.
Select <All> to display all destinations.
Select <> at the bottom of the screen to add or edit destinations.
4
Press [] or [] to highlight the destination, and then press [OK].
0880-051