Paper Jams
|
Before removing jammed paper, see "Attention (Paper Jams)."
|
When a paper jam occurs, the printer beeps, displaying the message <Paper is jammed.> in the display.
 |
This section describes the procedure for when [Animated Instruction] is set to [On] (default setting).
If [Animated Instruction] is set to [Off], the following screen is not displayed. |
Messages appear one at a time. Confirm all of them.
As the messages disappear when the cover is open, take a note of them if required.
As the messages disappear when the cover is open, take a note of them if required.
Remove the jammed paper according to the displayed message.
|
Paper Jam Area
|
Message
|
Clearance Procedure
|
||
|
(1) Multi-purpose tray
|
<MP Tray area>
|
|||
|
(2) Drawer 1
|
<Drawer 1 area>
|
|||
|
(3) Drawer 2*, Drawer 3*
|
<Drawer 2 area>
<Drawer 3 area> |
|||
|
(4) Duplex unit area
|
<2-sided unit area>
|
|||
|
(5) Output tray/Sub-output tray
|
<Sub/output tray area>
|
|||
|
(6) Inside the front cover
|
<Front cover>
|
|
|
Cleaning the feed roller may prevent frequent paper jams.
|
When you use thin paper (16.0 to 19.8 lb Bond (60 to 74 g/m²)), setting [Paper Type] to [Plain L] and [Special Print Mode C] to [On] may prevent frequent paper jams.
[Special Print Mode C] can also be set using the printer's control panel.