Installing the Printer

If you want to use the printer with optional accessories installed, install them before installing the printer.

Carrying the Printer to the Installation Site

If the paper cassette is inserted in the printer, pull it out as shown in the figure.

Carry the printer unit to the installation site.

After confirming that the covers and trays are closed, carry the printer by holding it by the lift handles from the front side.

Insert the paper cassette into the printer.

Push it into the printer firmly.

Make sure that the printer is OFF.

Connect the power cord.

NOTE
The form of the supplied power cord The form of the supplied power cord may differ from the one in the above illustration.

Press the power switch to turn the printer ON.

	The indicators and display on the control panel come on, and the printer initiates a self-diagnostic test on the printer unit and optional accessories.
If no abnormality is found during the self-diagnostic test, the Online indicator and Ready indicator come on, <Ready to print.> appears in the display, and the printer is ready to print.

The following information is displayed in the display.

Next, perform the following procedures.

1	Load paper.	"Loading Paper in the Paper Cassette" "Loading Paper in the Multi-purpose Tray"
2	Specifying a type of printer driver.	"Specifying a Type of Printer Driver"
3	Connecting to a computer.	"Connecting to a Computer"
4	Install the printer driver.	"For Windows" "For Macintosh"
5	Check the printing operation.	Check the operations by Test Page in Windows. "Basic Operations/Various Information for Windows"