The Printer Cannot Be Searched for (Auto Setup)

If the printer cannot be searched for (no devices are displayed in [Printer List]), perform the following procedure.
1
Make sure that the LAN cable is connected properly, and the printer is turned ON.
2
Click [Auto Search Again], to search for the printer on the network again.
 If the printer cannot be searched for (no devices are displayed) even by performing the above procedure
<Solution 1>
1.
Click [Manual Search by IP Address].
2.
Enter the IP address of the printer to be installed.
(The default IP address of the printer is "192.168.0.215".)
3.
Click [OK].
<Solution 2>
1.
Install the printer driver with a USB connection.
2.
Set the IP address using the Printer Status Window
3.
Change the port for the print driver to that used for LAN connection (Standard TCP/IP Port).
00AU-07J