Setting the IP Address Using the Printer Status Window

1
Click [ ] in the Windows taskbar, and then select the printer name.
2
From the [Options] menu, select [Device Settings] → [Network Settings].
3
Set the IP address.
(1)
Specify each setting.
(2)
Enter the administrator password for the printer (the password that is specified in the Remote UI).
If the password is not specified, you do not need to enter the password.
(3)
Click [OK].
[IP Address Setting with]
Select the method for setting the IP address.
[Manual Setting]
Allows you to set the IP address directly. The IP address entered in [IP Address] is set for the printer.
[Auto Detect]
Obtains an IP address using RARP, BOOTP, or DHCP.
[RARP]
Obtains an IP address using RARP.
(The RARP daemon needs to be running.)
[BOOTP]
Obtains an IP address using BOOTP.
(The BOOTP daemon needs to be running.)
[DHCP]
Obtains an IP address using DHCP.
(The DHCP server needs to be running.)
[IP Address]
Enter the IP address of the printer.
[Subnet Mask]
Enter the subnet mask as needed.
[Gateway Address]
Enter the gateway address as needed.
NOTE
When selecting [RARP]
You cannot enter any values in [IP Address].
When selecting [BOOTP] or [DHCP]
You cannot enter any values in [IP Address], [Subnet Mask], and [Gateway Address].
If you cannot use RARP, BOOTP, or DHCP
Specify the settings in [Manual Setting].
4
Click [OK].
5
Restart the printer. (Turn OFF the printer once, wait for 10 seconds or longer, and then turn it ON.)
After restarting the printer, the settings are effective.
Next, install the printer driver.
"Setting a Port and Installing the Printer Driver"
00AU-054