Control Panel

Unlike in the above illustration, the indicator names are indicated above the respective icons depending on the country or region.

Indicators

Name
Status
Solution
(2) Toner Indicator
(On or Blinking)
An error is occurring for the toner cartridges.
(Such as when the toner cartridges have reached the end of their life)
Solve the problem following the message displayed in the Printer Status Window.*1
(3) Ready Indicator
(On)
The printer is ready to print.
(Blinking)
The printer is busy printing, preparing to print, or cleaning.
(4) Alarm Indicator
(On)
A service error is occurring.
Solve the problem following the message displayed in the Printer Status Window.*1
(Blinking)
An error is occurring.
(6) Job Indicator
(On)
A job is being printed or is waiting to be printed.
(Blinking)
A job is being canceled.
(8) Wi-Fi Indicator
(LBP7110Cw Only)
(On)
The printer is connected by wireless LAN.
(Blinking)
The wireless LAN is configured.
(9) Main Power Indicator
(On)
The printer is turned ON.
(Blinking)
The printer is being turned OFF.
(10) Paper Jam Indicator
(Blinking)
A paper jam is occurring.
Remove the paper jam.
(11) Load Paper Indicator
(Blinking)
Paper needs to be checked.
(Such as when paper runs out and when paper cannot be fed properly)
Load the paper properly.
(12) Go Indicator
(Blinking)
An error occurred, but you can ignore the error and continue printing.
To skip the error and continue printing, press the [] (Go) key.*2
*1
For details on the procedure for displaying the Printer Status Window, see "Printer Status Window."
*2
Skipping the error and continuing printing (by pressing the [] (Go) key) may cause unexpected print results.

Button/Keys

Name
Function
(1) Reset Button
Turning ON the printer while pressing this button initializes the system settings.*1
(5) Cancel Job Key
Press this key to cancel the job that is currently being printed or a job with an error.*2
(7) Wi-Fi Key
(LBP7110Cw Only)
Use this key when configuring the wireless LAN connection settings with the Button System (WPS).
(12) Go Key
When the Go indicator is blinking:
Press this key to skip the error and continue printing.
When the Job indicator is off:
Press and hold this key (for 3 seconds) when the Ready indicator is on or blinking to print the "User Data List."*3
*1
*2
*3
For details, see "Printing the "User Data List"."
0F40-015