Printing a Booklet

You can print two pages of a document on both sides of paper, and then fold your printed pages in half to make a booklet. The printer driver controls the print order in such a way that the page numbers are correctly arranged.


You cannot perform booklet printing when the sub-output tray is opened. When you perform booklet printing, be sure to confirm that the sub-output tray is closed. Back Side


Booklet printing may not be available with some sizes or types of paper. Paper

[Basic Settings] tab

Select [Booklet Printing] in [1-sided/2-sided/Booklet Printing]

Click [Booklet] to specify detailed settings as necessary

[OK]

[1-sided/2-sided/Booklet Printing]

Select [Booklet Printing].

For [1-sided Printing] and [2-sided Printing], see Switching 1-Sided and 2-Sided Printing.

[Booklet]

The screen below is displayed.

[Booklet Printing Method]

[All Pages at Once]	Prints all of the pages at once as a single bundle so that you can make a booklet just by folding the printed pages in half.
[Divide into Sets]	Prints as multiple bundles divided by the number of the pages specified on [Sheets per Set]. Bind each bundle, and then combine them as one booklet. Select this option when the document has so many pages that you cannot bind them all into a single booklet.

[Specify Booklet Gutter]

If you are using a stapler or other binding tools, specify the margin width for binding your booklet. Select the [Specify Booklet Gutter] check box and specify the margin width in [Booklet Gutter].

Printing a Document