Back Side

You can connect a USB memory device to the machine and directly print the data from the USB memory device. You can directly print the data in the USB memory device without using a computer. Printing from USB Memory (USB Direct Print)

Air from inside the machine is vented out to cool down the inside of the machine. Note that placing objects in front of the ventilation slots prevents ventilation. Installation

Press the power switch to turn ON the power. When turning OFF the power, do not use this switch, but follow the procedures shown in Turning OFF the Power (Performing a Shutdown).

Hold the lift handles when carrying the machine. Relocating the Machine

Open the right cover when installing the optional ROM. Installing the ROM

Open the sub-output tray to relieve curls when using easy-to-curl paper such as transparencies, labels, and envelopes. Paper Curls

 

The protective cover prevents dust from entering into the machine.

 

Open the duplex unit when performing 2-sided printing or clearing jams in the output tray.

Open the SD card slot cover when installing the optional SD card. Installing an SD Card

Connect a LAN cable when connecting the machine to a hub (or router). Connecting via Wired LAN

Connect a USB cable when connecting the machine and a computer. Connecting via USB

Connect a USB device that is used with MEAP applications. Connect a USB memory device when exporting or importing the settings of the machine (IMPORT/EXPORT).

The ACT indicator blinks green while data is being sent or received.

The LNK indicator blinks green when the machine is properly connected to a network.

Connect the power cord. Connecting the Power Cord