Starting the Remote UI
To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI. Check the IP address set to the machine in advance (Network Status Print). If you have any questions, ask your network administrator.
1
Start the Web browser.
2
Enter "http://<IP address of the machine>/" in the address field, and press the [ENTER] key.
If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://[fe80::2e9e:fcff:fe4e:dbce]/).
If using a DNS server
You can enter "<host name of the machine>.<domain name>" instead of "IP address of the machine" (example: http://my_printer.example.com).
You can enter "<host name of the machine>.<domain name>" instead of "IP address of the machine" (example: http://my_printer.example.com).
If a security alert is displayed
When the Remote UI communication is encrypted (Using TLS for Encrypted Communications), a security alert may be displayed. When certificate settings or TLS settings have no errors, continue browsing the Web site.
When the Remote UI communication is encrypted (Using TLS for Encrypted Communications), a security alert may be displayed. When certificate settings or TLS settings have no errors, continue browsing the Web site.
3
Select [Management Mode] or [General User Mode].
 |
[Management Mode]
You can perform all the Remote UI operations and settings. Enter the System Manager password in [Password].
|
|
The default System Manager password is "7654321." Setting the System Manager Password
|
|
 |
[General User Mode]
You can check the status of documents in the print waiting list, the status of the machine, and the current specification of various settings. If you wish to check the status of a document in the waiting list or to delete a document from the waiting list, enter the user name of the document in [User Name]. The user name is automatically set when the document is designated to be printed, and automatically it is the computer name or logon name of your computer.
|
|
About [User Name]
By default, [User Name] is not displayed to disable general users to operate documents. If you want to operate documents in General User Mode, log on in Management Mode and enable [Allow General User Job Operation]. Enabling End Users to Operate Documents |
|
 |
[Remote UI Access PIN]
If [Remote UI Access PIN] is displayed, enter the PIN (Setting a Remote UI PIN).
|
When the Department ID Management is enabled
Enter the appropriate ID in [Department ID] and PIN in [PIN] (Setting the Department ID Management).
4
Click [Log In].
 |
The Portal Page (main page) will be displayed. Remote UI Screens
 |