Select Feeder Menu

The settings about the paper source and the size of paper loaded in the machine are listed with short descriptions. When you press  (Feeder Selection) on the operation panel, the Select Feeder menu is displayed. Default settings are marked with a dagger ().
Common settings
The settings are the same as those for <Paper Source> in the Setup Menu. The settings specified here are also applied to the <Paper Source> settings.
Asterisks (*)
Settings marked with an asterisk (*) are not displayed depending on other settings or whether an optional paper feeder is installed in the machine.
 

Paper Source

Select the paper source from which paper is fed. When you want to automatically change the paper source based on the paper size and paper type, select <Auto>.
Auto
Drawer 1
Drawer 2 *
Drawer 3 *
Drawer 4 *
Multi-Purpose Tray

MP Tray Paper Size

Specify the size of the paper that is loaded in the multi-purpose tray. Specifying Paper Size for the Multi-Purpose Tray
A5
B5
A4
A4R
B4
A3
LTR
LTRR
LGL
LDR
EXEC
Mixed Sizes
Custom Size
Custom Size R
Env. ISO-C5
Env. Monarch
Env. No.10
Env. DL
Index Card
STMT
FLSC
8K
16K

MP Tray Priority

Select whether to prioritize paper feeding from the multi-purpose tray when <Paper Source> is set to <Auto>. If you select <On>, paper is fed from the multi-purpose tray when the same size paper is loaded in both the multi-purpose tray and the paper drawer.
Off
On
When <Diff. Paper Tray> is set to <On>, paper is preferentially fed from the paper drawer even if <MP Tray Priority> is set to <On>.

Drawer N Size (N=1, 2, 3, 4) *

Specify this setting when non-standard size paper is loaded in a paper drawer or you want to print with <Mixed Sizes> set. This setting is displayed only when the paper size dial is set to "Custom."
Mixed Sizes
Custom Size
Custom Size R
STMT *
8K
About <Mixed Sizes>
If paper to load is frequently changed, you can select <Mixed Sizes> to eliminate the need to change the settings for each paper change. However, note that the paper size specified on the printer driver is not checked before printing in this case.
If you select <Mixed Sizes>, the print speed will be slower.

Standard Paper Size

When you want to print a document from a computer in the operating system such as UNIX that does not support the printer driver, you cannot specify the paper size. In this case, specify this setting to select the paper size.
A5
B5
A4
B4
A3
LTR
LGL
LDR
EXEC
Env. ISO-C5
Env. Monarch
Env. No.10
Env. DL
Index Card
STMT
FLSC
8K
16K

Diff. Paper Tray

If you select <On> with <Paper Source> set to <Auto>, the multi-purpose tray is automatically selected when appropriate size paper is not loaded in any paper drawer.
Off
On

Auto Selection

If you select <On> with <Paper Source> set to <Auto>, the machine automatically selects the paper source with appropriate size paper loaded. Also, when the paper runs out, this setting enables continuous printing by switching from one paper source to another that is loaded with the same paper size.
Off
On

Default Paper Type

When you want to print a document from a computer in the operating system such as UNIX that does not support the printer driver, you cannot specify the paper type. In this case, specify this setting to select the paper type for printing.
Plain
Plain L
Plain L2
Plain H
Heavy 1
Heavy 2
Heavy 3
Transparency
Envelope
Envelope H
Labels

Manual 2-Sided (MP)

Select the side of paper to print on when you want to perform 2-sided printing manually from the multi-purpose tray.
1st Side
2nd Side

2-Sided Printing

Select whether to print on both sides of paper.
Off
On
0J3J-06A