Connecting via USB
Install the software, and then use a USB cable to connect the machine to the computer. The machine does not come with a USB cable. Have a cable ready as necessary.
1
Install the software.
Install the MF Drivers, MF Toolbox, and the other included software. For more information, see MF Driver Installation Guide.
2
Remove the cap that covers the USB port on the back side of the machine.
Pull the string to remove the cap.
3
Connect the USB cable.
Connect the flat end (
) to the USB port on the computer.
) to the USB port on the computer.Connect the square end (
) to the USB port on the machine.
) to the USB port on the machine.
NOTE:
If the dialog box prompting you to install the software is displayed, disconnect the USB cable from the computer, click [Cancel], and then start from step 1 again.
»
Continue to Configuring Initial Settings for Fax Functions