Viewing Network Settings

NOTE
The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
You can print a list of the current network settings. User Data List/System Manager Data List

Viewing IPv4 Settings

 (Status Monitor) <Network Information>    <IPv4>    Select the setting to view  

Viewing IPv6 Settings

 (Status Monitor) <Network Information>    <IPv6>    Select the setting to view  

Viewing the MAC Address

1
Press .
2
Use / to select <Network Settings>, and press .
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the Machine
3
Select <Ethernet Driver Settings>, and press .

Viewing Wireless LAN Settings and Information (MF8580Cdw / MF8280Cw Only)

1
Press .
2
Use / to select <Network Settings>, and press .
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the Machine
3
Select <Wireless LAN Settings>, and press .
If the <Do you want to enable the wireless LAN?> message is displayed, select <Yes>, and press .
4
Read the message that is displayed, and press .
5
Select <Wireless LAN Information>, and press .
6
Select the setting to view, and press .
Viewing WEP and WPA/WPA2-PSK information
1
Select <Security Settings>, and press .
2
View the current security settings, and press .
If the security settings are not configured, <None> is displayed.
3
Select the setting to view, and press .
 
WEP
 
WPA/WPA2-PSK
 
 
 
 
 
NOTE:
<Wireless LAN Status> and <Latest Error Information> can be viewed from (Status Monitor). Press  (Status Monitor)  <Network Information>  <Wireless LAN Information> and select the setting to view.
0AU5-084