Output Tray Designation
You can designate which output tray to use for specific functions.
The output trays indicated by Tray A, B, and C vary according to the attached optional products.
This mode can be set when one of the Inner 2way Tray-J1, Copy Tray-J2, Inner Finisher-G1, Staple Finisher-U1, or Booklet Finisher-U1 is attached. (See Inner 2way Tray-J1, Copy Tray-J2, Inner Finisher-G1, or Staple Finisher-U1/Booklet Finisher-U1.)
|
Options Attached
|
Default Settings
|
Tray A/B/C
|
|
Inner 2way Tray-J1
|
Tray A:
1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other, 2 Fax*1
Tray B:
2 Copy, 2 Access Stored Files, 2 Printer, 1 Receive, 1 Other, 1 Fax*1
|
 |
|
Copy Tray-J2
|
Tray A:
1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other, 2 Fax*1
Tray B:
2 Copy, 2 Access Stored Files, 2 Printer, 1 Receive, 1 Other, 1 Fax*1
|
 |
|
Inner 2way Tray-J1 and Copy Tray-J2
|
Tray A:
1 Copy, 1 Access Stored Files, 1 Printer
Tray B:
2 Copy, 2 Access Stored Files, 2 Printer
Tray C:
1 Receive, 1 Other, 1 Fax*1
|
 |
|
Inner Finisher-G1
|
Tray A:
1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other, 2 Fax*1
Tray B*1:
2 Copy, 2 Access Stored Files, 2 Printer, 1 Receive, 1 Other, 1 Fax*1
|
 |
|
Inner Finisher-G1 and Copy Tray-J2
|
Tray A:
1 Copy, 1 Access Stored Files, 1 Printer
Tray B:
2 Copy, 2 Access Stored Files, 2 Printer
Tray C:
1 Receive, 1 Other, 1 Fax*1
|
 |
|
Staple Finisher-U1
|
Tray A:
1 Copy, 1 Access Stored Files, 1 Printer
Tray B:
2 Copy, 2 Access Stored Files, 2 Printer
Tray C:
1 Receive, 1 Other, 1 Fax*1
|
 |
|
Booklet Finisher-U1
|
Tray A:
1 Copy, 1 Access Stored Files, 1 Printer
Tray B:
2 Copy, 2 Access Stored Files, 2 Printer
Tray C:
1 Receive, 1 Other, 1 Fax*1
|
 |
|
*1
|
Indicates items that appear only when the appropriate optional equipment is available for use.
|
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Function Settings] → [Common] → [Paper Output Settings].
3.
Press [Output Tray Settings].
4.
Set the output and priority settings for Tray A/B/C → press [OK].
[Fax] is displayed only if the fax board is installed.
[Other] is used for setting the priority for printing reports.
If the Super G3 2nd Line Fax Board is installed, you can set up to two fax lines (Fax Line 1 to 2).
If you want to use an output tray for only one function, select only that function.
To set the tray home position when the Staple Finisher-U1, Booklet Finisher-U1, or Inner Finisher-G1 are attached, select the tray home position to be used while jobs are being processed from the <Tray Home Position> drop-down list.
|
Details of each item are shown below:
|
|
|
[Tray A]:
|
Tray A moves closer to the output area.
|
|
[Tray B]:
|
Tray B moves closer to the output area.
|
|
[Off]:
|
The tray home position is not set. The output tray stops at the position it is in when printing finishes.
|
|
IMPORTANT
|
|
If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated for the same function. However, it is recommended that you only designate one tray for fax/I fax documents to prevent them from getting lost.
If the Inner Finisher-G1 and Copy Tray-J2 are attached and the Staple mode is set, the sheets are output to Tray A, regardless of the Tray Designation settings.
If the Copy Tray-J2 is attached and you select any of the following paper types, the sheets are output to trays other than the Copy Tray-J2, even if the Copy Tray-J2 is specified as the destination: nonstandard, envelopes, heavy paper, transparencies, labels, coated paper, or tracing paper.
|
|
NOTE
|
|
You can designate an output tray for multiple functions.
The priority order of the output destinations is determined by the order of the selected output trays. The priority is displayed as "1," "2," and "3."
|