Printing Booklet
 |
You can print two pages of a document on both sides of paper. If the paper is folded at the center, a booklet is formed. The printer driver controls the print order in such a way that the page numbers are correctly arranged.
|
|
|
|
You cannot perform booklet printing when the sub-output tray is left open. When you perform booklet printing, always make sure that the sub-output tray is closed. Back Side
|
 |
|
To perform booklet printing, you need an optional duplex unit. Duplex Unit DU-D1
Booklet printing may not be available with some sizes or types of paper. Paper
|
[Basic Settings] tab 
Select [Booklet Printing] in [1-sided/2-sided/Booklet Printing] Click [Booklet] to specify detailed settings as necessary [OK] [OK]
Select [Booklet Printing] in [1-sided/2-sided/Booklet Printing] Click [Booklet] to specify detailed settings as necessary [OK] [OK]
[1-sided/2-sided/Booklet Printing]
Select [Booklet Printing].
For [1-sided Printing] and [2-sided Printing], see Performing 2-Sided Printing.
[Booklet]
The screen shown below appears.
[Booklet Printing Method]
|
[All Pages at Once]
|
Prints all of the pages at once as a single bundle. You can make a booklet just by folding the printed pages in half.
|
|
[Divide into Sets]
|
Select this setting when there are too many pages that they cannot be bound all at once. The number of sheets specified for [Sheets per Set] are allocated to a single set for printing. Fold the smaller sets, and then collect them to form a booklet.
 |
[Specify Booklet Gutter]
If you are using a stapler or other binding tool, specify the margin width for binding your booklet. Select the [Specify Booklet Gutter] check box and specify the margin width in [Booklet Gutter].