Adjustment/Maintenance

 
All the settings about adjustment and maintenance are listed with short descriptions. Default settings are marked with a dagger ().
Asterisks (*)
Settings marked with an asterisk (*) are only available when the optional paper drawer (drawer 2) is attached.

Auto Adjust Gradation

Adjust the gradation, density, and color in copies or printouts. Correcting the Gradation
Full Adjust
Quick Adjust
Adjust Copy Image

Auto Correction Settings

Select whether to automatically perform a quick gradation adjustment or color shift correction after the machine is turned ON.
Auto Adjust Image Regularly
Select when to make an automatic quick gradation adjustment. If <On> is selected, quick adjustment is automatically made after the machine is turned ON. If <Off> is selected, a quick adjustment is made when the first printing is completed after the machine is turned ON. You can also perform this adjustment manually (Quick Adjust).
Off
On
Correct Print Color Mismatch When Main Power is ON
Select whether to automatically perform the Correct Print Color Mismatch function after the machine is turned ON. You can also perform this adjustment manually (Correcting "Print Color Mismatch").
Off
On

Correct Print Color Mismatch

Use this function if color shift has blurred the image. Correcting "Print Color Mismatch"

Display Timing for Cartridge Preparation Notification

Set the display timing for the message notifying you that the amount remaining in the toner cartridges is low.
Auto
 
Custom
1 to 20 to 99 (%)

Black Text Processing for Color

Adjust the threshold value to determine whether to print black text in color documents by using only black toner or by using a mixture of black and color toners. You can set values for the feeder and the platen glass separately. Adjusting Values for Text Color Reproducibility in Color Documents
Feeder
Seven Levels
 
Platen Glass
Seven Levels

Special Processing

If the print results on special types of paper are not satisfactory, the following settings may improve the quality of the printouts.
Special Paper Processing
When printing on the back side of printed paper, rough paper, or envelopes, the print results may be improved by adjusting the following settings.
Manual Back Side Settings (for 2-Sided Only)
If printouts on the back side of printed paper are too light, select <On>. You can specify this setting separately for each paper source.
Multi-Purpose Tray
Off
On
 
Drawer 1
Off
On
 
Drawer 2*
Off
On
Rough Paper Settings
When printing on rough paper, especially when color images are printed too light, select <On>. You can specify the settings separately for each paper source.
Multi-Purpose Tray
Off
On
 
Drawer 1
Off
On
 
Drawer 2*
Off
On
Envelope Cling Prevention
If envelope flaps cling to the envelope bodies when printing, select <On>.
Off
On
Envelope Switch
Adjust this setting if envelope printouts are light, or envelopes do not feed smoothly.
Envelope 1
Envelope 2
Special Mode P
If the printed paper curls, select <On>.
Off
On

Clean Fixing Assembly

Clean the fixing unit after a toner cartridge is replaced or if black streaks appear on printouts. Fixing Unit

Clean ITB

Clean the transfer belt inside the machine to prevent the print quality from deteriorating. Transfer Belt

Clean Feeder

Clean the feeder rollers if documents become dirty after being fed through the feeder. Feeder 
0SCJ-0AJ