Page Numbering

This mode enables you to print page numbers, numbers with hyphens, and numbers with chapter numbers etc. on copies.

Press [Copy].

Press [Options] → [Page Numbering].

Select the type of page number.

Set the image orientation and position → press [Next].

Orientation:

[Upright Image]:	Press this if you are placing originals upright.
[Sideways Image]:	Press this if you are placing originals sideways.

NOTE
If you set any two of the Page Numbering, Copy Set Numbering, Watermark, or Print Date mode to print in the same position, a confirmation message appears when you press .

You can press [Set Details] to adjust the printing position and set the printing position for the back side when performing two-sided copying.

To adjust the printing position, press [X] or [Y] → adjust the printing position with [-] or [+] → press [OK].

To set the printing position for the back side when performing two-sided copying, select [Opposite to Front Side] or [Same as Front Side] → press [OK].

Specify the print settings for the page numbers.

Press the <Size> drop-down list → select the size of the page numbers.

Press the <Color> drop-down list → select the colour of the page numbers.

Enter the starting number using

(numeric keys).

To specify detailed printing settings, press [Set Details].

If you do not want to specify other settings, proceed to step 7.

Specifying the number of digits to be printed:

Adding text:

Counting inserted sheets:

Specifying the number of digits to be printed:

Press [No. of Digits].

Use [-] and [+] to enter the number of digits to display → press [OK] → [OK].

NOTE
You can specify a number of digits between '2' and '5'. Example: If the page number is 10, and the number of digits is 2:10 → 10 If the page number is 10, and the number of digits is 5:10 → 00010 If the specified number of digits is less than the number of digits of the actual page number, the setting is invalid.

Adding text:

Press [Add Characters].

Press [Enter].

Enter the text → press [OK].

You can also select text that has been registered in [Register Characters for Page No./Watermark] in [Function Settings] (Settings/Registration). (See "Registering/Editing/Deleting User-Defined Text for Page Numbers and Watermarks.")

Select the printing position for the text to add → press [OK] → [OK].

Counting inserted sheets:

Press [Inserted Sheets].

Press [Count] → [OK] → [OK].

Counts all sheet insertions, chapter pages, and back covers inserted after the first page. However, chapter numbers and page numbers are only printed onto the main document pages.

If you press [Do Not Count], the machine does not count any sheets, chapter pages, or back covers inserted after the first page. Chapter numbers and page numbers are only printed onto the main document pages.

Press [OK] → [Close].

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart." Printing performance may not be optimal, depending on the original content and combination of settings. If you use the Page Numbering mode with the Add Cover or Insert Sheets mode, numbers will not be printed on the inserted pages.

NOTE
If you select [Numbered Chapters] in combination with the or Insert Sheets mode, the chapter numbers are counted at the following times: After each chapter page is inserted After each sheet insertion is inserted