Setting/Confirming a Key Pair and Device Certificate

Setting a Key Pair and Device Certificate

To "Settings/Registration Table."
The following procedures describe how to generate and update the key pair and device certificate necessary for adding a device signature to a PDF or XPS file.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
1.
Press .
2.
Press [Management Settings] → [Device Management] → [Certificate Settings].
3.
Press [Generate Key].
4.
Press [Generate/Update Device Signature Key].
5.
Press [Yes].
IMPORTANT
You can register only one key pair.
NOTE
The name of the generated/updated key pair is set to 'Device Signature Key'.
6.
Press [OK].

Confirming a Key Pair and Device Certificate

To "Settings/Registration Table."
The following procedure describes how to confirm a key pair and device certificate generated/updated in "Setting a Key Pair and Device Certificate."
1.
Press .
2.
Press [Management Settings] → [Device Management] → [Certificate Settings].
3.
Press [Key and Certificate List] → [Key and Certificate List for This Device].
If is displayed to the left of a key pair, it is corrupted or invalid. Follow the procedure in "Setting a Key Pair and Device Certificate." to generate/update a key pair.
NOTE
You cannot delete or edit a key pair necessary for a device signature on the Key and Certificate List for this Machine screen.
4.
Select [Device Signature Key] → press [Certificate Details] → [Certificate].
If [Certificate] is grayed out or <The key is corrupted or invalid.> is displayed, you cannot use the key pair. Follow the procedure in "Setting a Key Pair and Device Certificate" to generate/update a key pair.
NOTE
<Cert. Thumbprint> contains sender information used to validate the reliability of a PDF or XPS file with a device signature, by matching it with the MD5 or SHA-1 message digest number.
The expiration date for the device signature is set to 5 years after its key pair was generated/updated.
5.
Press [OK] → [OK] → [OK].
6.
Press [OK].

IMPORTANT
For information on how a general user can check the device certificate, see "Checking a Device Signature/User Signature Certificate."