Various Scan Settings

Specifying/Registering Scan Sizes

You can manually specify a scan size when scanning originals that cannot be detected using the [Auto] mode, such as transparencies, or originals smaller than A5 size. You can also store frequently used scan size settings.

Specifying the Scan Size Selecting a Paper Size

You can specify a paper size for scanning.

If you want to scan an A3 original with an image that extends all the way to the edges without the periphery of the original being cut off, place the original on the platen glass → press [A3+].

Specifying the Scan Size Manually

You can enter a custom X and Y value to specify the size for scanning.

2-Sided Original*

You can scan and send both sides of a two-sided original placed in the feeder.

Book → 2 Pages

This mode enables you to scan and send facing pages in books as individual pages.

Different Size Originals

This mode enables you to scan different size originals with the same widths (A3 and A4, or B4 and B5, etc.) or different widths (A3 and B4, or A4 and B5, etc.) together.

Changing the Zoom Ratio

This mode enables you to enlarge or reduce the size of your original when sending. You can also set the machine to automatically adjust the zoom ratio.

Preset Zoom

You can use preset zoom ratios to enlarge or reduce standard size originals to other standard sizes.

Zoom by Percentage

You can reduce or enlarge originals by any zoom ratio in 1% increments. The same zoom ratio is used for the horizontal and vertical axes.

Auto Zoom

You can automatically enlarge or reduce an original to a specified paper size. The same zoom ratio is used for the horizontal and vertical axes.

Erase Frame

This mode enables you to erase the shadows, lines, and binding marks that appear when scanning various types of originals.

The following three options are available:

Erase Original Frame

This mode erases the dark borders and frame lines that appear around the scanned image if the original is smaller than the specified paper size. You can also use this mode to create a blank border around the edge of the scanned image.

Erase Book Frame

This mode erases the dark borders, as well as centre and contour lines that appear when you scan an original such as a magazine or a book.

Erase Binding

This mode erases the shadows that appear on scanned images from binding holes on originals.

Job Build

This mode enables you to scan originals that are too many to be placed at once, by dividing them into multiple batches. You can use both the feeder and the platen glass to scan.

*: Depending on the region, the optional product is required to use this function. For information on the optional product, see "Optional Products Required for Each Function."