IP Address:
Even if the product's IP address is changed, the connection is maintained if the machine and the computer belong to the same subnet.
If you are using the machine in an IPv6 environment, you cannot use the Scan function.
Device necessary for wired LAN connection:
The machine does not come with a LAN cable, a router or a hub. Have cables or a hub ready as needed.
The machine supports 10BASE-T and 100BASE-TX connections. If you want to connect the machine to a 100BASE-TX Ethernet network, all the devices connected to the LAN (router, hub, LAN cable, and network board for computer) must support 100BASE-TX.
For details, refer to the instruction manual for your devices or contact their manufacturer.
To connect the machine to a switching hub:
The connection may fail even if the network settings are configured correctly.
When this occurs, delay the startup of the machine's network connection.
|