Installing the MF Drivers and MF Toolbox
|
See "Attention (MF Drivers and MF Toolbox)" in advance.
|
If the computer you are installing the drivers in is running a 64-bit operating system, download the 64-bit version drivers from the Canon web site.To install the software, perform the following operations:
1. Decompress the downloaded file.
2. Double-click the [Setup.exe] file to start the installer.
3. Follow the instructions on the screen.
Install the software required to use the machine.
There are two methods of installation. The default installation method is [Easy Installation].
If you want to install the following software or manuals that are not installed in [Easy Installation], install them using [Custom Installation].
e-Manual
Installing with [Easy Installation]
1
Insert the User Software CD-ROM into the computer.
2
Click [Easy Installation].
 If the above screen is not displayed: |
|
If the language selection screen is displayed before the CD-ROM setup screen appears: Select the language and click [OK].
|
3
When the following screen appears, select [USB Connection], and click [Next].
4
Click [Install].
5
Read the License Agreement, and then click [Yes].
6
Click [Next].
When the following screen is displayed, click [Yes].
7
Click [Exit].
 |
|
Next, the MF Toolbox installation begins.
|
8
Click [Start].
9
Click [Exit].
Confirm that the applications you want to install are selected, and then click [Next].
11
Restart the computer.
|
(1)
|
Select the [Restart Computer Now (Recommended)] check box.
|
|
(2)
|
Click [Restart].
|
|
|
If this screen is displayed, you can remove the CD-ROM from the CD-ROM drive.
|
|
After restarting the computer, connect the machine and computer with a USB cable.
|
Installing with [Custom Installation]
1
Insert the User Software CD-ROM into the computer.
2
Click [Custom Installation].
|
If the above screen is not displayed: |
|
If the language selection screen is displayed before the CD-ROM setup screen appears: Select the language and click [OK].
|
3
When the following screen is displayed, select [USB Connection], and click [Next].
Select the software you want to install, and then click [Install].
5
Confirm the License Agreement, and then click [Yes].
6
Click [Next].
When the following screen is displayed, click [Yes].
7
Click [Exit].
|
Next, the MF Toolbox installation begins.
|
8
Click [Next].
The screen to set the MF Toolbox installation destination, and to set where in the [Start] Menu to add the MF Tool Box to, is displayed.
Perform the settings in each screen, and then click [Next]. Click [Start] on the screen that is displayed.
9
Click [Exit].
|
Next, the software selected in step 4 is installed. Follow the instructions on the screen.
|
Confirm that the applications you want to install are selected, and then click [Next].
11
Restart the computer.
|
(1)
|
Select the [Restart Computer Now (Recommended)] check box.
|
|
(2)
|
Click [Restart].
|
|
|
If this screen is displayed, you can remove the CD-ROM from the CD-ROM drive.
|
|
After restarting the computer, connect the machine and computer with a USB cable.
|
USB Cable Connection
1
Connect the USB cable.
|
Flat end (A):
|
Connect this end to the USB port on the computer.
|
|
Square end (B):
|
Connect this end to the USB port on the machine.
|
|
If a dialog box is displayed: Follow the instructions on the screen to complete the installation.
|
|
Check the installation results after installation is completed.
|
Checking the Installation Results
Check that the MF Driver, the MF Toolbox, any additional software, and the e-Manual have been correctly installed.
Check that the icons of the installed software have been added as shown below.
|
NOTE
|
Displayed Icons:Depending on the operating system, the driver for each icon is displayed separately, or only a representative icon is displayed.
|
