Adjustment/Maintenance

NOTE
Menu options in the following chart:
Default settings are highlighted in bold.
The settings marked with "*1" are only for when the optional feeder (DADF-AM1) is attached to the imageRUNNER 2202N/2002N.

Printer Density

You can specify the printer density when copying, printing, or report printing.
-4 to 0 to +4
"Specifying the Printer Density"

Toner Save

Set the toner save mode when printing a copy:
Off, Low Save Mode, High Save Mode
"Using the Toner Save Mode"

Auto Corr. Dirty Scan*1

When dirt on the scanning area causes output paper to have streaks, you can automatically correct this.
Off, On
"Automatically Correcting Streaks Caused by Dirt on the Scanning Area(imageRUNNER 2202N/2002N Only)"

Special Processing

Settings
Descriptions
Special Mode O
Paper jams may frequently occur when using the multi-purpose tray to copy/print on the reverse side of paper that has already been copied/printed on, depending on the paper type (especially with thin paper and curled paper).
In this case, change this setting to <Mode 1> or <Mode 2>.
Off, Mode 1, Mode 2
<Off> should normally be specified for this setting. Only change this setting if the above symptom occurs.
If you change this setting to <On> when printing on paper other than thin paper, white patches may appear in printed images.
"Special Mode"
Special Mode M
Marks from toner scattering may appear around text and patterns, depending on the paper type (especially with heavy paper).
In this case, change this setting.
Mode 1, Mode 2, Mode 3, Mode 4, Mode 5
The order of the level of improvement is as follows.
<Mode 1><Mode 2>
<Mode 3>
<Mode 4>
<Mode 5>
(low)
(Off)
(high)
"Special Mode"
Special Mode N
Paper jams may frequently occur when copying/printing on the back of copied/printed paper, depending on the paper type (especially with curled paper and damp paper).
In this case, change this setting to <Mode 1> or <Mode 2>.
Off, Mode 1, Mode 2
"Special Mode"
Special Mode S
When you change the paper size and continue the print, the machine stops its operations until the new paper is loaded. You can shorten this waiting time to prioritize print speed.
Off, Mode 1, Mode 2
The order of waiting times is as follows.
<Mode 1>
<Mode 2>
<Off>
(short waiting time)
(long waiting time)
"Special Mode"
Special Mode P
Printed paper may become curled, depending on the paper type and usage environment. In this case, change this setting to <On>.
Off, On
"Special Mode"
Special Mode F
Uneven images may appear on the printed paper. In this case, change this setting.
Off, Mode 1, Mode 2, Mode 3
The order of the level of improvement is as follows.
<Mode 1><Mode 2>
<Mode 3>
(low)
(high)
"Special Mode"

Clean Transfer Roller

If stains appear on the back of printed paper, clean the transfer roller.
"Transcription Roller Cleaning"

Clean Drum Unit

If the quality of the print decreases, clean the drum unit.
"Drum Cleaning"

Clean Fixing Unit

If black streaks appear on printed paper, clean the fixing unit when replacing toner cartridges.
"Cleaning the Fixing Unit"

Clean Feeder*1

If pencil dust etc. gets on the roller and originals are printed with stains, clean the feeder (DADF-AM1).
"Automatic Feeder Cleaning(imageRUNNER 2202N/2002N Only)"
0FJJ-08H