Sending Faxes

1
Place the document. Placing Documents
2
Press .
If a logon screen appears, see Logging on to Authorized Send (imageRUNNER 1435iF / 1435i Only).
3
Enter the destination using the numeric keys, and press .
If you enter the wrong characters, press . (Press to delete each character one by one. Press and hold to delete all the input characters at once.)
To make it easier to specify destinations by using other methods, such as the Address Book, see Specifying Destinations for Faxes.
NOTE:
When <Confirm Fax Number> is set to <On>, a screen appears that prompts you to enter the destination again (Checking Destinations before Sending Documents). Enter the same destination again for confirmation.
To send overseas
4
Specify the scanning settings as necessary.
Use / to select the settings. Various Fax Settings
5
Press to start sending.
Scanning starts.
If you want to cancel sending, press   <Yes>  .
When placing documents in the feeder in step 1
When scanning is complete, the fax is sent.
When placing documents on the platen glass in step 1
 
TIPS
If you always want to send faxes with the same settings:
If you want to register frequently used setting combinations:
If you want to sound an alarm when the handset is off the hook:
0KCF-02X