Printing on Labels

Confirming usable labels

This printer can use the following sizes of labels.
Standard sizes
A3, B4, A4, B5, A5, 305x457 mm, Ledger, Legal, Letter, Executive, Statement*, Foolscap, 8K, 16K and Long sizes
Custom paper sizes
In case of portrait orientation (only when the UFR II printer driver is used): Short edges 120.0 to 297.0 mm; Long edges 120.0 to 297.0 mm
In case of landscape orientation: Short edges 76.2 to 304.8 mm; Long edges 120.0 to 457.2 mm
Long sizes
Short edges 210.0 to 297.0 mm; Long edges 457.3 to 1200.0 mm*
*
The paper can be loaded only in landscape orientation (when the long edges of the paper are parallel to the front side of the printer).
Using the following types of labels may result in paper jams that are difficult to clear or may result in damage to the printer.
Peeled labels or partly used labels
Coated labels that are easily peeled off from the backing sheet
Labels with uneven adhesive

Loading labels

You can load labels only in the multi-purpose tray.
<Precautions when loading labels>
Fan the labels thoroughly, and then align the edges before loading them. If they are not fanned enough, multiple sheets of paper may be fed at once, causing paper jams.

Take care not to mark or stain the printing surface of the labels with fingerprints, dust, or oil. This may result in poor print quality.

Printing from an application

After loading labels, perform printing.
The print speed drops when printing on labels.
[Resolution] cannot be set to [1200 dpi] when printing on labels.
113H-047