Common Settings

 
All the settings about the operation of the paper drawer and the paper feed method are listed with short descriptions. Default settings are marked with a dagger ().
Asterisks (*)
Settings marked with an asterisk (*) are only available when the optional paper feeder (drawer 2) is attached.

Drawer Auto Selection On/Off

Enable or disable the automatic drawer selection feature for the paper sources. If automatic drawer selection is set to <On> when printing documents, the machine automatically selects a paper source that is loaded with the appropriate paper size. Also, when the paper runs out, this setting enables continuous printing by switching from one paper source to another that is loaded with the same paper size.
Copy
Multi-Purpose Tray
Off
On
Drawer 1
Off
On
Drawer 2*
Off
On
 
Printer
Drawer 1
Off
On
Drawer 2*
Off
On
 
Receive/Fax
Multi-Purpose Tray
Off
On
Drawer 1
Off
On
Drawer 2*
Off
On
 
Other
Multi-Purpose Tray
Off
On
Drawer 1
Off
On
Drawer 2*
Off
On

Switch Paper Feed Method

Specify this setting when you print a document on paper with logos. To print on paper with logos, you need to change how the paper loaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing. However, if you specify <Print Side Priority>, you can use just the same way of paper loading (which side up or down) both for 1- and 2-sided printing (namely, the side with logos face up when using the paper drawer, or the side with logos face down when using the multi-purpose tray). For more information, see Loading Preprinted Paper.
Multi-Purpose Tray
Speed Priority
Print Side Priority
 
Drawer 1
Speed Priority
Print Side Priority
 
Drawer 2*
Speed Priority
Print Side Priority
0UX0-0AH