Selecting Destinations Directly by Entering Coded Dial Numbers

 
You can directly enter the three-digit number (coded dial number) for a destination to send a fax.
You need to register destinations in the coded dial numbers before using this feature.
1
Press  and tap <Coded Dial>.
2
Use the numeric keys to enter a three-digit number (001 to 100), then tap <Apply>.
If you enter the wrong characters, press . (Press to delete each character one by one; press and hold to delete all the input characters at once.)

If a confirmation screen appears
When <Confirm One-Touch/Coded Dial TX> is set to <On>, a screen is displayed that shows the destination and the name for the number. (For Group Dial, the destination name and the number of destinations are shown.) Check the contents and if everything is correct, and tap <OK>. If you have difficulty, tap <Cancel> and re-enter the three-digit coded dial number. Displaying Destinations in Address Book
If you want to specify multiple destinations
Repeat the following steps. You can specify up to 100 destinations.
<Destination>  <Specify from Coded Dial>  Enter a number  <Apply>.
To specify any additional destinations with the numeric keys, tap <Destination>  <Specify Using Numeric Keys>.
3
Specify the scanning settings as necessary.
Select the settings. Various Fax Settings
4
Press  to start sending.
Scanning starts.
If you want to cancel sending, press   Tap <Yes>.
To delete destinations
If you specified multiple destinations, you can delete destinations as necessary.
100W-026