Preparing for Using the FTP Server
Because the factory default settings prevent operations from FTP clients, specify settings to allow the operations.
1
Start the Remote UI and log on in Management Mode.
Starting Remote UI
2
Click [Settings/Registration].
3
Click [Network]
[TCP/IP Settings].
4
Click [Edit] in [FTP Settings].
5
Specify the required settings and click [OK].
[Use FTP Print]
To perform printing via FTP client, select the check box. Otherwise, clear the check box.
[FTP Print User Name]
Enter up to 24 alphanumeric characters for the user name used to log on to the FTP server when performing FTP Print.
You cannot set "root."
[Set/Change Password]
Select the check box to set the FTP Print password, and enter up to 24 alphanumeric characters for the password in the [Password] text box. For confirmation, enter the same password in the [Confirm] text box.
If you click [OK] with the check box selected and the [Password] and [Confirm] text boxes left blank, the currently set password is deleted.
[Use UTF-8 to Display Name of FTP Print Job]
Select the check box if you are using UTF-8 character code for the name of the file to be printed.
[Allow Setting via FTP]
Select the check box to allow setting changes of the machine via FTP client. When not allowing setting changes, clear the check box.
6
Perform a hard reset.
Click [Device Control], select [Hard Reset], and then click [Execute].
The settings are enabled after the hard reset is performed.
|
Using the operation panel
You can also enable or disable FTP print, and FTP settings from the setting menu of the operation panel. FTP
|
LINKS