<Adjust Image Quality>
All the settings related to image quality adjustment are listed with descriptions. Default settings are marked with a dagger (
).
|
Asterisks (*)Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. |
<Auto Adjust Gradation>
<Full Adjust> <Standard (Plain)> <Standard (Heavy)> <For Printer 1200 dpi> <Quick Adjust> |
<Correct Shading>
If the image areas of the printing have uneven density, this correction adjusts the printing so that the density is even.
Correcting Uneven Density<Densitometer Correction> <Visual Correction> <Adjust (Yellow)>/<Adjust (Magenta)>/<Adjust (Cyan)>/<Adjust (Black)> <-6>: -127 to ±0 to +127 <-5>: -127 to ±0 to +127 <-4>: -127 to ±0 to +127 <-3>: -127 to ±0 to +127 <-2>: -127 to ±0 to +127 <-1>: -127 to ±0 to +127 <±0>: -127 to ±0 to +127 <+1>: -127 to ±0 to +127 <+2>: -127 to ±0 to +127 <+3>: -127 to ±0 to +127 <+4>: -127 to ±0 to +127 <+5>: -127 to ±0 to +127 <+6>: -127 to ±0 to +127 <Output Test Page> <Restore Initial Settings> <Restore Previous Settings> <Scanner Correction> |
<Correct Print Color Mismatch>
<Black Text Processing for Color>
<Feeder>* Seven Levels <Platen Glass> Seven Levels |
<Special Processing>
If the print results on special types of paper are not satisfactory, the following settings may improve the quality of the printouts.
<Special Paper Processing>
When printing on the back side of printed paper, rough paper, or envelopes, the print results may be improved by adjusting the following settings.
<Manual Back Side Print (2-Sided Only)>
If printouts on the back side of printed paper are too light, select <On>. You can specify this setting separately for each paper source.
<Multi-Purpose Tray> <Off> <On> <Drawer 1> <Off> <On> <Drawer 2> <Off> <On> <Drawer 3>* <Off> <On> <Drawer 4>* <Off> <On> |
<Menu>
<Adjustment/Maintenance>
<Adjust Image Quality>
<Special Processing>
<Special Paper Processing>
<Manual Back Side Print (2-Sided Only)>
Select <On> in the paper source to be set
<Apply>
<Yes>
<Adj. Toner Vol. for Color Print.>
You can prevent excessive toner from being fixed onto paper to reduce print failure such as poor toner fixing or bleed-through.
Troubleshooting<Off> <Level 1> <Level 2> |
<Fill Area Image Adj. Mode>
When printing an original with a lot of fill, correct the unevenness of the filled part.
Common Problems<Mode 1> <Mode 2> <Mode 3> |