Configuring the Paper Source
You can configure the paper source used when printing the document text.
|
NOTE
|
|
The paper source setting is prioritized in the order page > chapter > document.
This function can only be used when you select a Canon printer and the [Use print settings of Editor] check box on the [Print Settings] tab on the Details Window, the ribbon command, or the tool button.
The document text are the pages other than the following specified in [Sheet for Insertion].
Front cover
Back cover
Tab paper
Sheets
For details on how to set Front cover, Back cover, Tab paper, and Sheets, see the following.
For more information on how to set the paper source on a chapter basis, see the following.
For more information on how to set the paper source on a page basis, see the following.
|
1.
Select the paper source to use for printing the document text in [Paper Source Settings] on the [Print Settings] tab on the Details Window.
Or, click 
(Paper Source of Content Pages) on the ribbon and select the paper source.
(Paper Source of Content Pages) on the ribbon and select the paper source.
|
NOTE
|
|
If the Details Window is not displayed, see the following.
The settings that can be selected for the paper source of the document text differ according to the type of paper sources in the printer selected in [Printer].
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|