Configuring the Paper Source on a Chapter Basis

You can configure the paper source used when printing the document text on a document.
You can configure the paper source settings for the specified chapter differently from the entire document.

NOTE
The paper source setting is prioritized in the order page > chapter > document. This function can only be used when you select a Canon printer and the [Use print settings of Editor] check box on the [Print Settings] tab on the Details Window, the ribbon command, or the tool button. The document text are the pages other than the following specified in [Sheet for Insertion]. Front cover Back cover Tab paper Sheets For details on how to set Front cover, Back cover, Tab paper, and Sheets, see the following. Configuring the Front Cover/Back Cover/Tab Paper/Sheets When setting the paper source for the entire document, see the following. Configuring the Paper Source For more information on how to set the paper source on a page basis, see the following. Configuring the Paper Source on a Page Basis For more information on how to cancel the settings on a chapter basis, see the following. Canceling Print Settings Specified on a Chapter Basis

NOTE

The paper source setting is prioritized in the order page > chapter > document.

This function can only be used when you select a Canon printer and the [Use print settings of Editor] check box on the [Print Settings] tab on the Details Window, the ribbon command, or the tool button.

The document text are the pages other than the following specified in [Sheet for Insertion].

Front cover

Back cover

Tab paper

Sheets

For details on how to set Front cover, Back cover, Tab paper, and Sheets, see the following.

Configuring the Front Cover/Back Cover/Tab Paper/Sheets

When setting the paper source for the entire document, see the following.

Configuring the Paper Source

For more information on how to set the paper source on a page basis, see the following.

Configuring the Paper Source on a Page Basis

For more information on how to cancel the settings on a chapter basis, see the following.

Canceling Print Settings Specified on a Chapter Basis

Select

(Chapter) for the chapter to specify the paper source settings for on the [Page Tree] tab on the Navigation Window.

NOTE
If the [Page Tree] tab on the Navigation Window is not displayed, see the following. Displaying/Hiding the Navigation Window

Click

for

(Chapter Settings) on the ribbon.

Or, follow one of the steps described below.

Click

for

(Chapter Settings) on the ribbon, and select [Chapter Settings]

Click

(Chapter Settings) on the ribbon

Right-click and select [Chapter Settings]

The [Chapter Settings] dialog box is displayed.

NOTE
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them. Adding Commands to Ribbons This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars

Select the [Specify paper source for selected chapter] check box on the [Print Settings] tab.

Select the paper source to use from the [Paper Source of Content Pages] pull-down list.

Click [OK].

The chapter icon displayed on the [Page Tree] tab on the Navigation Window changes to

and the chapter name changes to blue.

NOTE
The setting items in [Paper Source of Content Pages] vary depending on the paper source of the printer selected in [Printer].