Copying Mail Merge Fields

Mail Merge fields inserted with Desktop Editor can be copied or cut, and they can be pasted in another location.

Copying the Content of Text Fields

This section describes how to copy the content of text fields.

Click

(Select Fields) on the Details Window.

Move the mouse pointer to the text field with content you want to copy on the Work Window, and click the field when the shape of the mouse pointer changes to

Or, drag the mouse pointer selection rectangle to include the text field to copy its content.

Move the mouse pointer to the selected text field and click the mouse.

The shape of the mouse pointer changes to

Select the range to copy by dragging the mouse pointer.

Or, press the arrow keys while holding the [Shift] key on the keyboard.

NOTE
Selecting a text field in which a field has been inserted causes the text field name to display the field name. Because of this, you cannot select the record value. You cannot select and copy a part of the field name.

Click

(Copy) on the toolbar.

Or, right-click and select [Copy].

NOTE
If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars

To paste the copied text, click

(Paste) on the toolbar.

Or, right-click and select [Paste].

NOTE
If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars

Cutting the Content of Text Fields

This section describes how to cut the content of text fields.

Click

(Select Fields) on the Details Window.

Move the mouse pointer to the text field with content you want to cut on the Work Window, and click the field when the shape of the mouse pointer changes to

Or, drag the mouse pointer selection rectangle to include the text field to cut its content.

Move the mouse pointer to the selected text field and click the mouse.

The shape of the mouse pointer changes to

Select the range to copy by dragging the mouse pointer.

Or, press the arrow keys while holding the [Shift] key on the keyboard.

NOTE
Selecting a text field in which a record has been inserted causes the text field name to display the record name. Because of this, you cannot select the record value. You cannot select and copy a part of the record name.

Click

(Cut) on the toolbar.

Or, right-click and select [Cut].

NOTE
If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars

To paste the cut text, click

(Paste) on the toolbar.

Or, right-click and select [Paste].

NOTE
If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars

Copying Mail Merge Fields

This section describes how to copy Mail Merge fields.

Click

(Select Fields) on the Details Window.

Move the mouse pointer to the Mail Merge field that you want to copy on the Work Window, and click the field when the shape of the mouse pointer changes to

Or, drag the mouse pointer selection rectangle to include the Mail Merge field to copy.

NOTE
Multiple Mail Merge fields can be selected by clicking them while holding down the [Ctrl] key on the keyboard. If you want to select all Mail Merge fields on the page, perform one of the following operations in an area on the Work Window without a Mail Merge field, while keeping the Work Window active. Click (Select All) on the toolbar. Right-click and select [Select All]. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars You can only select multiple Mail Merge fields if they are on the same page.

NOTE

Multiple Mail Merge fields can be selected by clicking them while holding down the [Ctrl] key on the keyboard.

If you want to select all Mail Merge fields on the page, perform one of the following operations in an area on the Work Window without a Mail Merge field, while keeping the Work Window active.

Click

(Select All) on the toolbar.

Right-click and select [Select All].

If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.

Setting Buttons on Toolbars

Lists of Ribbon Commands/Toolbars

You can only select multiple Mail Merge fields if they are on the same page.

Click

(Copy) on the toolbar.

Or, follow one of the steps described below.

Right-click and select [Copy].

Drag while holding the [Ctrl] key on the keyboard.

NOTE
If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars

To paste the copied Mail Merge field, click

(Paste) on the toolbar.

Or, right-click and select [Paste].

NOTE
If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars When the same page is specified as the paste destination of the copied Mail Merge field, the Mail Merge field is pasted 15 pixels below and to the right of the copy source. When a different page is specified as the paste destination, the Mail Merge field is pasted in the same position as the copy source. A copied Mail Merge field can only be pasted in the same document from which it was copied. When copying Mail Merge fields outside of the page area and pasting them, they are pasted to the upper left of the page they are pasted in.

NOTE

If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.

Setting Buttons on Toolbars

Lists of Ribbon Commands/Toolbars

When the same page is specified as the paste destination of the copied Mail Merge field, the Mail Merge field is pasted 15 pixels below and to the right of the copy source.

When a different page is specified as the paste destination, the Mail Merge field is pasted in the same position as the copy source.

A copied Mail Merge field can only be pasted in the same document from which it was copied.

When copying Mail Merge fields outside of the page area and pasting them, they are pasted to the upper left of the page they are pasted in.

Cutting Mail Merge Fields

This section describes how to cut Mail Merge fields.

Click

(Select Fields) on the Details Window.

Move the mouse pointer to the Mail Merge field that you want to cut on the Work Window, and click the field when the shape of the mouse pointer changes to

Or, drag the mouse pointer selection rectangle to include the Mail Merge field to cut.

NOTE
Multiple Mail Merge fields can be selected by clicking them while holding down the [Ctrl] key on the keyboard. If you want to select all Mail Merge fields on the page, perform one of the following operations in an area on the Work Window without a Mail Merge field, while keeping the Work Window active. Click (Select All) on the toolbar. Right-click and select [Select All]. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars You can only select multiple Mail Merge fields if they are on the same page.

NOTE

Multiple Mail Merge fields can be selected by clicking them while holding down the [Ctrl] key on the keyboard.

If you want to select all Mail Merge fields on the page, perform one of the following operations in an area on the Work Window without a Mail Merge field, while keeping the Work Window active.

Click

(Select All) on the toolbar.

Right-click and select [Select All].

If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.

Setting Buttons on Toolbars

Lists of Ribbon Commands/Toolbars

You can only select multiple Mail Merge fields if they are on the same page.

Click

(Cut) on the toolbar.

Or, right-click and select [Cut].

NOTE
If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars

To paste the cut Mail Merge field, click

(Paste) on the toolbar.

Or, right-click and select [Paste].

NOTE
If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars If you paste the Mail Merge field on the page from which it was cut, the Mail Merge field is pasted in the following position. Normally: The same position as the copy source. If the same item is already pasted: 15 pixels below and to the right of the copy source. When a different page is specified as the paste destination, the Mail Merge field is pasted in the same position as the cut source. A cut Mail Merge field can only be pasted in the same document from which it was cut. When cutting Mail Merge fields outside of the page area and pasting them, they are pasted to the upper left of the page they are pasted in.

NOTE

If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.

Setting Buttons on Toolbars

Lists of Ribbon Commands/Toolbars

If you paste the Mail Merge field on the page from which it was cut, the Mail Merge field is pasted in the following position.

Normally: The same position as the copy source.

If the same item is already pasted: 15 pixels below and to the right of the copy source.

When a different page is specified as the paste destination, the Mail Merge field is pasted in the same position as the cut source.

A cut Mail Merge field can only be pasted in the same document from which it was cut.

When cutting Mail Merge fields outside of the page area and pasting them, they are pasted to the upper left of the page they are pasted in.