Canceling Stapling Set for the Entire Document on a Chapter Basis

The staple settings to bind each chapter (that are set for the entire document) can be canceled on a chapter basis.

NOTE
If [Staple Each Chapter] is selected for the staple settings, staple settings can be canceled on a chapter basis. For information on how to add staple settings to the entire document, see the following. Specifying Stapling

Select the chapter to cancel staple settings for on the [Page Tree] tab of the Navigation Window.

NOTE
If the [Page Tree] tab on the Navigation Window is not displayed, see the following. Displaying/Hiding the Navigation Window

Click the icon for the ribbon command.

Or, follow one of the steps described below.

Select [Chapter Settings] on the ribbon > [Chapter Settings]

Click [Chapter Settings] on the ribbon

Right-click and select [Chapter Settings]

[Chapter Settings] is displayed.

NOTE
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them. Adding Commands to Ribbons This operation can also be performed with the tool buttons. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Tool Buttons on the Toolbar Lists of Ribbon Commands/Tool Buttons

Select the [Specify staple settings for selected chapter] check box on the [Print Settings] tab.

Select the [Do not staple] check box.

NOTE
Click [Apply] to check the document preview in the Work Window without closing [Chapter Settings].

Click [OK].

The chapter icon displayed on the [Page Tree] tab on the Navigation Window changes and the chapter name changes to blue.

NOTE
If [Auto (Size)] is selected as the output size, the staple settings are canceled. If you set stapling, only [Z-fold] can be set in the fold settings.