<Network>

All the settings related to the network are listed with descriptions. Default settings are marked with a dagger (

<RMT-SW>


Asterisks () Settings marked with "1" cannot be imported or exported. Settings marked with "*2" may not be displayed depending on the model you are using, options, or other setting items.

<Select Wired/Wireless LAN>

When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using the following <Wireless LAN Settings>). Selecting Wired LAN or Wireless LAN

<Wireless LAN Settings>

Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the setting for saving power consumption.

<SSID Settings>

Select to configure a wireless connection by specifying information including an SSID or a network key by inputting manually from the operation panel.

<Select Access Point>

Wireless LAN routers that can access the machine are automatically located, so you can select from the list. You must manually enter a network key, such as a WEP key or a PSK. Setting Up Connection by Selecting a Wireless Router

<Enter Manually>

Select to configure a wireless connection by manually entering an SSID. By using this method, you can specify authentication and encryption settings in detail. Setting Up Connection by Specifying Detailed Settings

WEP Key 1 to 4

WEP Key 1 to 4

<Auto>

<AES-CCMP>

<WPS Push Button Mode>

Select to automatically configure a wireless connection by using the button on a WPS wireless router. Setting Up Connection Using WPS Push Button Mode

<WPS PIN Code Mode>

Select to configure a wireless connection by entering a PIN code for a WPS wireless router. Setting Up Connection Using WPS PIN Code Mode

<Power Save Mode>

Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.

<Off>

<On>

<Menu>

Read the displayed message

<OK>

Select <Off> or <On>

<Connection Information> *1

Select to view the current wireless LAN settings. Viewing Network Settings

<Direct Connection Settings>

Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an environment without an access point or wireless LAN router. Connecting Directly (Access Point Mode)

<Off>

<On>

<Direct Connection Termination>

Specify the time to automatically disconnect after Direct Connection is established.

<Off>

<On>

to 60 (min.)

<Menu>

Select <On> in <Automatically Terminate Session> and enter the time

<Apply>

<Access Point Mode Settings>

Configure the SSID/network key arbitrarily. If you want to connect multiple mobile devices to the machine at the same time, you need to configure both SSID and network key arbitrarily.

<Off>

<On>

<SSID>

<Off>

<On>

<Menu>

Select <On> for each item and select <SSID>/<Network Key>

Enter the SSID/network key

<Apply>

<Easy Connection via PC>

Start the procedure for Easy Connection via PC (cableless setup mode). You can use Canon Laser NW Device Setup Utility to configure network settings via a computer.

<Menu>

<Yes>

The connection process starts


Download Canon Laser NW Device Setup Utility from the Canon website (http://www.canon.com/).

<TCP/IP Settings>

Specify settings for using the machine in a TCP/IP network, such as IP address settings.

<IPv4 Settings>

Specify settings for using the machine in an IPv4 network.

<IP Address Settings>

Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP network. Setting IPv4 Address

<Off>

<On>

<Off>

<DHCP>

<Off>

<On>

<Manually Acquire>*2

<IP Address>: 0.0.0.0
<Subnet Mask>: 0.0.0.0
<Gateway Address>: 0.0.0.0

<DHCP Option Settings>

If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Off>

<On>

<PING Command>

Select to check that the machine is connected to a computer over a network. Testing the Network Connection

<IPv6 Settings>

Specify settings for using the machine in an IPv6 network. Setting IPv6 Addresses

<Off>

<On>

<Check IPv6 Settings>

You can check the link-local address that is automatically acquired.

<Stateless Address Settings>

Enable or disable stateless addresses.

<Off>

<On>

<DHCPv6 Settings>

Enable or disable the stateful address that is acquired via DHCPv6.

<Off>

<On>

<DHCP Option Settings>

If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS

<Off>

<On>

<Off>

<On>

<DNS Settings>

Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Configuring DNS

<IPv4 DNS Server Address Settings>

Specify the IP address of the DNS server in the IPv4 environment.

<Primary DNS Server>: 0.0.0.0
<Secondary DNS Server>: 0.0.0.0

<DNS Host Name/Domain Name Settings>

Specify the host name of the machine to be registered in the DNS server as well as the name of the domain to which the machine belongs.

<IPv4>

<IPv6>

<Off>

<On>

<DNS Dynamic Update Settings>

Select whether to dynamically update the DNS records whenever the machine's IP address is changed.

<IPv4>

<Off>

<On>

0 to 24

to 48 (hr.)

<IPv6>

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Off>

<On>

0 to 24

to 48 (hr.)

<mDNS Settings>

Specify settings for using DNS functions without DNS servers.

<IPv4>

<Off>

<On>

<IPv6>

<Off>

<On>

<Off>

<On>

<WINS Settings>

Specify settings for Windows Internet Name Service (WINS), which provides a NetBIOS name for IP address resolutions in a mixed network environment of NetBIOS and TCP/IP. Configuring WINS

<Off>

<On>

<WINS Server Address>: 0.0.0.0

<LPD Settings>

Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. You can also set the reception timeout period after which printing is canceled if print data reception is interrupted. Configuring Printing Protocols and WSD Functions

<Off>

<On>

1 to 5

to 60 (min.)

<RAW Settings>

Enable or disable RAW, a Windows specific printing protocol. You can also set the reception timeout period after which printing is canceled if print data reception is interrupted. Configuring Printing Protocols and WSD Functions

<Off>

<On>

1 to 5

to 60 (min.)

<WSD Settings>

Enable or disable automatic browsing and acquiring information for the printer or scanner by using the WSD protocol. Configuring Printing Protocols and WSD Functions

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Use FTP PASV Mode>

Specify whether to use PASV mode for FTP. If you are connecting to an FTP server through a firewall, you must select PASV mode. Configuring FTP PASV Mode

<Off>

<On>

<Use HTTP>

Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote UI, WSD printing, or printing with Google Cloud Print. Disabling HTTP Communication

<Off>

<On>

<Use IPSec> *1

Select whether to perform encrypted communication by establishing a virtual private network (VPN) via IPSec. Configuring IPSec Settings

<Off>

<On>

<Menu>

Select <Off> or <On>

<OK>

Restart the machine

<Port Number Settings>

Change port numbers for protocols according to the network environment. Changing Port Numbers

<LPD>

1 to 515

to 65535

<RAW>

1 to 9100

to 65535

1 to 3702

to 65535

<HTTP>

1 to 80

to 65535

1 to 427

to 65535

<POP3>

1 to 110

to 65535

<SMTP>

1 to 25

to 65535

<FTP>

1 to 21

to 65535

<SNMP>

1 to 161

to 65535

<MTU Size>

Select the maximum size of packets the machine sends or receives. Changing the Maximum Transmission Unit

<1300>

<1400>

<1500>

<SNMP Settings>

Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software. Monitoring and Controlling the Machine with SNMP

<SNMPv1 Settings>

Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to Management Information Base (MIB) objects.

<Off>

<On>

<Menu>

Select <Off> or <On> in <SNMPv1 Settings>

<Apply>

<OK>

Restart the machine

<SNMPv3 Settings>

Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is enabled.

<Off>

<On>

<Menu>

Select <Off> or <On> in <SNMPv3 Settings>

<Apply>

<OK>

Restart the machine

<Acquire Printer Mngt. Info. from Host>

Enable or disable the monitoring of printer management information from a networked computer running SNMP-compatible software.

<Off>

<On>

<Menu>

Select <Off> or <On> in <Acquire Printer Mngt. Info. from Host>

<Apply>

<OK>

Restart the machine

<Format Host Rsrcs. MIB to RFC2790>

Specify whether to conform to the advanced specifications (RFC2790) of the protocol when monitoring the machine status from the SNMP-compatible software.

<Off>

<On>

<Menu>

Select <Off> or <On> in <Format Host Rsrcs. MIB to RFC2790>

<Apply>

<OK>

Restart the machine

<Use Dedicated Port>

Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan Utility and when browsing or specifying the machine settings over the network.

<Off>

<On>

<Menu>

Select <Off> or <On>

<OK>

Restart the machine

<Dedicated Port Auth. Method>

Specify whether to limit the authentication method specifically to the secure one when using the dedicated port. If <Mode 2> is selected, the authentication method is limited specifically to the secure one.

<Menu>

Select <Mode 1> or <Mode 2>


If <Mode 2> is selected, you cannot establish a connection from the device management software or driver in some cases.

<Wait Time for Conn. at Startup>

Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a Wait Time for Connecting to a Network

to 300 (sec.)

<Ethernet Driver Settings>

Select the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/full-duplex). You can also view the MAC address for wired LAN.

<Auto Detect>

Select whether to automatically detect or manually select the communication mode and the Ethernet type. Configuring Ethernet Settings

<Off>

<10BASE-T>

<100BASE-TX>

<1000BASE-T>

<On>


When <Communication Mode> is set to <Half Duplex>, you cannot select <1000BASE-T>.

<MAC Address>

Check the MAC address of the machine, which is a number unique to each communication device. Viewing the MAC Address for Wired LAN

<Use IEEE 802.1X> 12

Enable or disable IEEE 802.1X authentication. Configuring IEEE 802.1X Authentication Settings

<Off>

<On>

<Menu>

Select <Off> or <On>

<OK>

Restart the machine

<Firewall Settings>

Without proper security, unauthorized third parties can access computers and other communication devices that are connected to a network. To prevent this unauthorized access, specify the settings for packet filter, a feature that restricts communication to devices with specified IP addresses or MAC addresses.

<IPv4 Address Filter>

Enable or disable settings for filtering packets sent to or received from devices with specified IPv4 addresses. Specifying IP Addresses for Firewall Settings

<Off>

<On>

<Off>

<On>

<Menu>

Select <Off> or <On> in <Outbound Filter> or <Inbound Filter>

<Apply>

<OK>

Restart the machine

<IPv6 Address Filter>

Enable or disable settings for filtering packets sent to or received from devices with specified IPv6 addresses. Specifying IP Addresses for Firewall Settings

<Off>

<On>

<Off>

<On>

<Menu>

Select <Off> or <On> in <Outbound Filter> or <Inbound Filter>

<Apply>

<OK>

Restart the machine

<MAC Address Filter>

Enable or disable settings for filtering packets sent to or received from devices with specified MAC addresses. Specifying MAC Addresses for Firewall Settings

<Off>

<On>

<Off>

<On>

<Menu>

Select <Off> or <On> in <Outbound Filter> or <Inbound Filter>

<Apply>

<OK>

Restart the machine

<Google Cloud Print Settings>

Enable or disable Google Cloud Print. Registering the Machine with Google Cloud Print

<Off>

<On>

<Google Cloud Print Regist. Status>*1

<Device Settings Management>

Specify whether to use imageWARE Enterprise Management Console plug-ins to manage machine data such as settings and Address Book destinations. For detailed information on imageWARE Enterprise Management Console, contact your nearest Canon dealer. Configuring Settings for Communication between the Machine and Plug-ins

<Off>

<On>

<Monitoring Service> 12

Enable communication with a remote monitoring server. Execution of this item enables information about the machine to be periodically sent to the remote monitoring server connected to the machine.

<Menu>

<Yes>

<RMT-SW>

Leave this switch set to <Off>. When the service representative remotely performs device maintenance, you may be asked to set the switch to <On>.

<Off>

<On>

<Menu>

<RMT-SW>

Select <Off> or <On>

<OK>

Restart the machine

<Initialize Network Settings>

Select to return the Network Settings to the factory defaults. <Initialize Menu>

<Network>

Asterisks (*)

<Select Wired/Wireless LAN>

<Wireless LAN Settings>

<SSID Settings>

<Select Access Point>

<Enter Manually>

<WPS Push Button Mode>

<WPS PIN Code Mode>

<Power Save Mode>

<Connection Information> *1

<Direct Connection Settings>

<Direct Connection Termination>

<Access Point Mode Settings>

<Easy Connection via PC>

<TCP/IP Settings>

<IPv4 Settings>

<IP Address Settings>

<DHCP Option Settings>

<PING Command>

<IPv6 Settings>

<Check IPv6 Settings>

<Stateless Address Settings>

<DHCPv6 Settings>

<DHCP Option Settings>

<DNS Settings>

<IPv4 DNS Server Address Settings>

<DNS Host Name/Domain Name Settings>

<DNS Dynamic Update Settings>

<mDNS Settings>

<WINS Settings>

<LPD Settings>

<RAW Settings>

<WSD Settings>

<Use FTP PASV Mode>

<Use HTTP>

<Use IPSec> *1

<Port Number Settings>

<MTU Size>

<SNMP Settings>

<SNMPv1 Settings>

<SNMPv3 Settings>

<Acquire Printer Mngt. Info. from Host>

<Format Host Rsrcs. MIB to RFC2790>

<Use Dedicated Port>

<Dedicated Port Auth. Method>

<Wait Time for Conn. at Startup>

<Ethernet Driver Settings>

<Auto Detect>

<MAC Address>

<Use IEEE 802.1X> *1*2

<Firewall Settings>

<IPv4 Address Filter>

<IPv6 Address Filter>

<MAC Address Filter>

<Google Cloud Print Settings>

<Device Settings Management>

<Monitoring Service> *1*2

<RMT-SW>

<Initialize Network Settings>

<Use IEEE 802.1X> 12

<Monitoring Service> 12