Basic Copy Operations

This section describes the basic operation procedure used to copy an original.

Place the original(s). Placing Originals

Select <Copy> in the Home screen. Home Screen

Select <Number of Copies>.

Enter the number of copies, and press

If you have entered an incorrect value, use the [Reset] key to clear it.

Specify the copy settings as necessary.

Adjusting Density

Enlarging or Reducing

Adjusting Density

You can adjust the density of the copy if the text or images in an original are too light or dark. You can also automatically set an optimal density for an original.

Adjust the density

<Auto Density>

An optimal density for the original is automatically set.

<Original Type> is automatically set to <Text>. Selecting the Type of Original for Copying

<Manual Density>

Use

to adjust the density.

Enlarging or Reducing

You can enlarge or reduce copies by using a preset copy ratio such as <A5->A4/LTR>, or by setting a custom copy ratio in increments of 1 %.


If you make a setting for <N on 1> after setting the copy ratio, the setting of reduction ratio in <N on 1> takes priority.

Select the copy ratio

<Custom Ratio>

Use

to enter the copy ratio, and press

. You can set any copy ratio from 25% to 400% in 1% increments.

Preset copy ratio

Select a copy ratio.

For information about other copy settings, see Enhancing and Adjusting Copy Quality or Useful Copy Functions.

Press

Copying starts.

If you want to cancel, select <Cancel>

<Yes>. Canceling Copies

For N on 1 copying

For N on 1 copying, the screen prompting you to load the next original is displayed.

1	Place the next original on the platen glass, and Press You can also specify <Density> separately for each original. Repeat this step until you finish scanning the entire original.
2	Select <Start Copying>.

When the <Size/Settings Mismatch> or <The memory is full. Scanning will be canceled. Print?> message is shown in the display. Countermeasures for Each Message


When copying originals with text or images that extend to the edges of the page The edges of the original might not be copied. For more information about the scan margins, see Main Unit.


If you always want to make copies with the same settings: Changing the Default Settings for Functions