Viewing Network Settings

The IP address is not correctly configured if it is displayed as "0.0.0.0". Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network You can print a list of the current network settings. User Data List/System Manager Data List

Viewing IPv4 Settings

  <Network Information>  <IPv4>  Select the setting to view  Check the settings

Viewing IPv6 Settings

  <Network Information>  <IPv6>  Select the setting to view  Check the settings

Viewing Direct Connection Information

  <Network Information>  <Direct Connection Information>  <Connection Details>  Check the settings

Viewing the MAC Address for Wired LAN

If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap <Apply>, and press . Setting the System Manager ID (imageRUNNER 2206N / 2006N)

Viewing the MAC Address and Information for Wireless LAN

If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap <Apply>, and press . Setting the System Manager ID (imageRUNNER 2206N / 2006N)

Viewing WEP and WPA/WPA2-PSK information

1	Tap <Security Settings>.
2	Confirm and tap the current security setting. If the security settings are not configured, <None> is displayed.
3	Select the setting to view.   WEP   WPA/WPA2-PSK

<Wireless LAN Status> and <Latest Error Information> can be viewed from . Press   <Network Information>  <Network Connection Method>  <Conn. Info> and select the setting to view.