Specifying Previously Used Destinations

 
You can select a destination from among the past three destinations. When you specify a previously used destination, the machine also sets the same scan settings such as density you used the last time you sent documents to that destination.
When <Restrict Resending from Log> is set to <On>, you cannot use this feature. Disabling Use of Previously Used Destinations
Turning OFF the machine or setting <Restrict New Destinations> to <On> deletes the past destinations, and disables this feature. Limiting Available Destinations
When using the machine with a USB connection, exit sleep mode before scanning. Entering Sleep Mode
When you specify a destination using this feature, any destinations that you have already specified are deleted.
1
Press and tap <Scan>.
When the logon screen appears, use the numeric keys to enter the user name and password. Then select the authentication server and press . Logging on to the Machine (imageRUNNER 2206N / 2006N)
2
Tap <E-Mail> or <File>.
3
Select <Destination>  <Recall Set.>.
If <E-Mail> is selected at step 2
If <File> is selected at step 2
4
Select a destination.
When you transmit to multiple destinations, only the address specified for the first transmission is displayed in the log, but all the destinations are specified.
The selected destination and its scan settings are specified. You can also change the settings before sending.
To delete destinations (e-mail)
When you transmitted to multiple destinations, you can delete destinations as necessary.
3R11-034