Saddle Stitch Fold Placement Adjustment
If you are using the Saddle Stitch mode of the Booklet Finisher-W PROor the Booklet Finisher-AC, and you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to the saddle stitch fold placement to compensate for this error.
This mode enables you to adjust the folding position without changing the stapling position.
This mode can be set when the Booklet Finisher-W PRO or the Booklet Finisher-AC is attached. (See "Staple Finisher-W PRO/Booklet Finisher-W PRO/Puncher Unit-BT/Puncher Unit-BU,""Staple Finisher-AC/Booklet Finisher-AC/2/4 Hole Puncher Unit-A/4 Hole Puncher Unit-A.")
IMPORTANT |
If the Booklet Finisher-W PRO is attached to the machine, you can adjust both the stitch position and the fold placement. If both the folds and stitches are not in the center of the booklet, adjust the alignment of the folding position and stitching position in [Adj. Saddle Stitch Fold Pos.], and then adjust the stitching position and folding position in [Change Fold/Stitch Position]. While only the folding position can be adjusted in [Adj. Saddle Stitch Fold Pos.], both the stitching position and folding position can be adjusted in [Change Fold/Stitch Position]. To adjust the stitch position, see "Saddle Stitch Position Adjustment." |
1.
Press 
.
.2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Adjust Saddle Stitch Fold Position].
3.
Adjust the saddle stitch fold placement by pressing [
] or [
] → press [OK].
] or [] → press [OK].