Saddle Stitch Position Adjustment

If you are using the Saddle Stitch mode of the Booklet Finisher-W PRO or the Booklet Finisher-AC, and you notice that the saddle stitch position of the paper are not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position to compensate for this error.
This mode can be set when the Booklet Finisher-W PRO or the Booklet Finisher-AC is attached. (See "Staple Finisher-W PRO/Booklet Finisher-W PRO/Puncher Unit-BT/Puncher Unit-BU," "Staple Finisher-AC/Booklet Finisher-AC/2/4 Hole Puncher Unit-A/4 Hole Puncher Unit-A.")
IMPORTANT
If the Booklet Finisher-W PRO or the Booklet Finisher-AC is attached to the machine, you can adjust both the stitch position and the fold placement.
If both the folds and stitches are not in the center of the booklet, adjust the alignment of the folding position and stitching position in [Adj. Saddle Stitch Fold Pos.], and then adjust the stitching position and folding position in [Change Fold/Stitch Position]. While only the folding position can be adjusted in [Adj. Saddle Stitch Fold Pos.], both the stitching position and folding position can be adjusted in [Change Fold/Stitch Position]. To adjust the fold placement, see "Saddle Stitch Fold Placement Adjustment."

1.
Press .
2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Change Fold/Stitch Position].
3.
Select the paper size to change → adjust the saddle stitch position by pressing [] or [] → press [OK].
3U17-0L6